Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
Automatic Tuning Automatic Tuning System If you have a satellite decoder: If your decoder is connected to the TV set by the aerial jack (C1), you must power on the demodulator and tune Sky News before starting ATSS . ATSS = Automatic Tuning and Sorting System.To start the ATSS function: - Select “ATSS” function. - Adjust to the required country. - Press and hold the OK button (A18) to start the automatic tuning. The ATSS function has started when the phrase “Please Wait !” appears (in red characters ) in the help instructions box, below the Install menu. At this point release the OK button. When the ATSS function is finished, the stored programs are displayed on screen using Edit menu presentation (to Exit tuning before automatic tuning is finished, press the remote control MENU button (A19). Position Position Previous Confirm GB Daily Use Daily Use 1) If stand-by indicator (B6) is red, then the TV set is in stand-by mode.You can switch on using the remote control POWER button (A1), the NUMBER 0….9 buttons (A3), or PROGRAM UP (A6) / DOWN (A21) buttons.The front panel PROGRAM UP/ DOWN buttons (B2) can also be used. Once on, the stand-by indicator turns to green and the picture appears on the screen. Switching On TV Set 2) If stand-by indicator (B6) is not lit, then the TV set is powered off.You must press the TV set front panel MAIN POWER button (B1). If a picture does not appear, then the standby indicator will be red. In this case, use the remote control as indicated in 1). 3) If stand-by indicator (B6) is flashing red, and green then the TV set is in child- lock mode. It is necessary to use the remote control POWER button (A1), NUMBER 0….9 buttons (A3), or PROGRAM UP (A6) / DOWN (A21) buttons. The front panel PROGRAM UP/DOWN buttons (B2) will not function. Once on, the stand-by indicator turns to green and the picture appears on the screen. Switching Off TV Set 1) Pressing the remote control POWER button (A1), you can switch off to stand-by mode (low power consumption mode) which also allows quick restart by remote control (see above: SWITCHING ON TV SET). 2) Pressing the TV set front panel MAIN POWER button (B1), you can completely power off the TV set. In this case, you must use the same front panel POWER button (B1) to switch on again (see above: SWITCHING ON TV SET). Remark: If a broadcast signal is not present after 10 minutes, the TV set will automatically turn to standby mode. 16 PR 17 Program Selection (From 0 to 99) Direct selection Use the remote control NUMBER 0…9 buttons (A3). For two digits program numbers, enter the second digit within 2 seconds. Up / Down selection Use the remote control PROGRAM UP (A6) / DOWN (A21) buttons or the TV set front panel PROGRAM UP / DOWN buttons (B2). Sound Control TV volume adjustment Use the remote control VOLUME UP (A20) / DOW (A7) buttons or the TV set front panel VOLUME UP / DOWN buttons (B3). Headphone volume adjustment You can access directly to headphone volume menu, pressing OK button of remote control and adjust volume using LEFT/RIGHT button. Remark: also you can adjust headphone volume level by selecting Sound Menu (see page 21) Mute Mute the sound by pressing the remote control SOUND MUTE button (A2). Then, logo is displayed. The previous sound setting is returned after pressing the same button a second time. If a sound related function is used (e.g. VOLUME, 3D) then the MUTE will also be cancelled. Mono forcing, dual language - If you are unable to get good sound quality for a program due to poor reception, you can force a change from stereo to mono transmission by pressing the remote control MODE button (A14). Then the program status display will indicate “MONO” with a icon. - On the other hand, during a program with dual language transmission, the MODE button (A14) allows you to toggle between the first and second language. The program status display will indicate “DUAL 1” or “DUAL 2” (plus NICAM according to the received signal). - To return to initial state, press again the MODE button (A14). Daily Use GB Daily Use Daily Use Sound effects A SPATIAL sound effect is available, using the remote control 3D (A13) button. The following display appears: SPATIAL STEREO 18:30 OFF STEREO 18:30 Spatial sound effect Sound transmission mode Clock To return to initial sound effect, press No sound effect again the 3D (A13) button. Sound transmission mode The following display appears: Clock As an option, the sound effects PANORAMA and Dolby Virtual are available with the same button. For other adjustments such as BALANCE, EQUALIZER or AVL(option), use the SOUND menu (page 21). Manufactured under license from Dolby Laboratories,“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Picture Control You can select three pictures settings, by using the remote control NORMAL button (A17) : - Normal I (standard hard picture) - Normal II (standard soft picture) - Favourite For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE REDUCTIO...
Otros modelos de este manual:TV - DLP-20J1 (4.73 mb)
TV - DLP-20W2 (4.73 mb)