Votos - 3, Puntuación media: 5
(
)
)
|
Resumen del manual
button to adjust the video tint/hue (Range: 0 – 100) Press the cursor .. button to adjust the gamma correction of the display Input Gamma Brightness PC 2.2 High MAC 1.8 High Video 2.4 Low Chart 2.2 Low B&W 2.4 High Press the cursor .. button to adjust the color space (Range: Auto – RGB – YPbPr- YCbCr) Reset all Main settings to default values DEFAULT 50 50 3 — 50 50 PC Auto — ViewSonic PJ588D/PJ568D/PJ508D Main Menu Functions Available for Connected Source Function RGB Component Video Composite Video S-Video Br ghtness x x x x Contrast x x x x Sharpness x x x x Color Temp x x x x Color Saturat on x x x Color T nt x x x Gamma x x x x Color Space x x x x Reset x x x x x = ava lable to v deo source Color Temperature Press the Menu button to open the OSD menu. Press ..to move to the Main menu. Press .• to move to the Color Temperature menu and then press Enter or .. Press .• to move up and down to select a color. Press .• to change values for sett ngs. ITEM DESCRIPTION DEFAULT Warm Press the cursor .. button to select the warm color temperature. — Normal Press the cursor .. button to select the normal color temperature. — Cool Press the cursor .. button to select the cool color temperature. — User Mode Press the cursor .. button to adjust the user mode color temperature. Press the cursor .. button to adjust the R/G/B color level. (Range: 0-100) ViewSonic PJ588D/PJ568D/PJ508D Setup Menu Press the Menu button to open the OSD menu. Press the cursor .• button to move to the Setup menu. Press the cursor .• button to move up and down n the Setup menu. Press .• to changevaluesforsett ngs. ITEM DESCRIPTION DEFAULT Horizontal Position Press the cursor .. button to move the image left or right (Range: 0 – 100) 50 Vertical Position Press the cursor .. button to move the image up or down (Range: 0 – 100) 50 Keystone Press the cursor .. button to correct distortion of the projected image (Range: -50 – +50) 0 Aspect Ratio Press the cursor .. button to toggle between the 4:3 standard format and the 16:9 High Definition TV (HDTV) format 4:3 Advanced Feature See “Advanced Feature” on page 25 — Reset Reset Keystone and Aspect Ratio to default values — Setup Menu Functions Available for Connected Source Function H Pos t on RGB x Component Video Composite Video S-video V Pos t on x Keystone correct on x x x x Aspect Rat o x x x x Advanced Feature x x x x Reset x x x x x = ava lable to v deo source ViewSonic PJ588D/PJ568D/PJ508D Advanced Feature Press the Menu button to open the OSD menu. Press .• to move to the Setup menu. Press .• to move to the Advanced Feature menu and then press Enter or .. Press .• to move upanddown ntheAdvanced Feature menu.Press..tochangevaluesforsett ngs. ITEM DESCRIPTION DEFAULT User Color This feature adjusts the color balance in each color of RGB (red, green, blue), and their neutral colors (cyan, magenta, yellow, white) by using color correction adjustment. Increasing a color’s setting heightens the intensity of that color on the screen, while a lower setting makes the color less intense. Press .• to select a color. Press .• to adjust the selected color. (Range: 0 – 100) 80 White Peaking White Peaking increases the output in the brightest whites without changing the blacks and dark grays. It crushes the whites slightly, but it does not appear to clip them or seriously obscure white detail. If you prefer a stronger image, adjust toward the maximum setting. For a smoother, more natural image, adjust toward the minimum setting. Press .• to adjust the value of white peaking. (Range: 0 – 10) Data source: 10 Video source: 2 Logo Display Press .• to enable or disable logo display when the projector starts, or when no source is detected (Range: On – Off) On Fan Speed Press the cursor .. button to toggle between Normal and High fan speed Normal Note: When altitude is over 5000 feet, fan speed must be changed to high fan speed. ViewSonic PJ588D/PJ568D/PJ508D Security Lock ITEM Press the cursor .. button to Enable or Disable Security Lock. When you enable Security Lock a Register Password dialog box appears: You can only use the following cursor buttons, • • • . in the password fields. Press the cursor buttons five times in any order and con-firm to set the password. When the password is enabled, it must be entered every time after you power on the projector. See “Setting an Ac-cess Password (Security Lock)” on page 13 for steps on setting the password. DESCRIPTION Disable DEFAULT Reset Press Enter or • to reset advanced feature settings to default values — Note: If Security Lock is enabled, you must enter the password every time the projector is turned on. However, if the projector is already turned on, Security Lock can be disabled without knowing the current password. ViewSonic PJ588D/PJ568D/PJ508D User Color Press the Menu button to open the OSD menu. Press ..to move to the Setup menu. Press .• to move to the Advanced Feature menu and then press Enter or .. Press .• to move to the User Color menu and then pre...
Otros modelos de este manual:TV - PJ508D (2.52 mb)