Votos - 5, Puntuación media: 4.4 ( )

Fabricar: Haier Tamaño del archivo: 1.63 mb Nombre del archivo: Idioma del manual:

Select 3 or 4 with channel switch on cable box. 2. Tune the TV channel to the same selected output channel on cable box. 3. Select channels at the cable box or with the cable box remote control. Connection Option 2 1. Connect the audio and video cables from the Cable Box's output jacks to the TV input jacks, as shown in the figure.When connecting the TV to a Cable Box, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). 2. Select the input source by using the TV/AV button on the remote control. 3. Select your desired channel with the remote control for cable box. External Component Source Setup How to connect Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). How to use 1. Select the input source by using the TV/AV button on the remote control. 2. Operate the corresponding external equipment. Refer to external equipment operating guide. Basic Operating Instructions Basic Operating Instructions Switch On/Off the TV set When the POWER button is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the power button, the LCD-TV will go into standby mode and the indicator light turns red(or turns dark). NOTE: The color of the indicator light may differ based upon the model purchased. Choose the input source Change the picture source so you can watch your TV, VCR, DVD, Cable , or any other devices that are connected to your TV. 1. Press the TV/AV button to enter the Select Source menu and then use TV/AV button to select the desired items TV, Video, S-Video, Component DVD, PC, HDMI . 2. Press the OK button to confirm . Audio Control 1.Press the VOL+ button to increase the volume. A number will appear on screen indicating the volume level. 2.Press the VOL-button to decrease the volume. A number will appear On screen indicating the volume level. Mute 1.Press the MUTE button to mute the sound temporarily. A mute icon Appears on the screen. 2.Press the MUTE button or VOL+ again to restore the sound. The mute icon disappears. INFO Press INFO button to display current program information. Basic Operating Instructions Basic Operating Instructions Select the TV Channel You Want You can use the number buttons and button on the remote control to directly select TV channels and pressOK to confirm. And you can press the buttons(CH+/CH-) on the remote control or on the panel to make a selection. button on the remote control for menu display . For desired mode Vivid Custom Press S.MODE button on the remote control for menu display . For desired mode as follows: Off Concert Living Room Hall Bathroom Cave Arena Church Picture Mode Audio Mode Pressas follows: Mild Standard P.MODE S Sleep Press SLEEP button to set the time : Off-5 Min-10 Min-15 Min-30 Min- 45 Min -60 Min-90 Min-120 Min-180 Min-240Min This function allows you to turn off the television after a pre-selected number of minutes GUIDE(only available in digital signal) Press GUIDE button in digital channels to display Guide menu.(This menu is just for you to see the information and can not be changed) Press VOL+/VOL-to select information for you to look over. ARC button Press to select the aspect ratio among Full Screen, Normal, Wide, Zoom and Cinema. (Display mode may differ from different inputs) Basic Operating InstructionsBasic Operating Instructions button Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select digital channel “11.1”, press “11”, then press “ ” and “1”. CH.LIST button FAV.LIST button Press to display the channel list. Press VOL+/VOL- to turn to the next or previous page, press CH+/CH- to select the item and OK button to select the channel you desired. Adding favorite channels Press FAV.LIST under one channel. The favorite channel list opens. Press CH+ or CH– to select a blank box, then press OK to confirm . The channel will be added to the favorites channel list. Press OK again, the channel will be removed from the f avorites channel list. Tuning to a favorite channel Press FAV.LIST. The favorite channel list opens. Press CH+ or CH– to select the channel and pressOK to confirm . Your LCD TV automatically tunes to the channel you selected. Menu Operations Menu Operations * In this manual, the OSD (On Screen Display) may be differ from your TV These are examples to illustrate the TV's operation. Press TV/AV to select the input source. The menu for each source may be different . 1. Press MENU button to display the main menu, and CH+/CH-to select the main menu function. 2. Press VOL+/OK button to enter the sub menu and CH+/CH- to go up and down to select the desired option . 3. Press VOL+/OK button to confirm and VOL+/VOL-to make changes to the parameters 4. Press the EXIT ...

Descargar ahora

Introduzca dos números de la imagen: