Votos - 4, Puntuación media: 4.8 ( )

Fabricar: Hitachi Tamaño del archivo: 5.3 mb Nombre del archivo: Idioma del manual:

During the Lock Time, you must use your passcode to view the TV. To enable the lock: Press ADJUST or to select On or Off, then press ADJUST to move to the Lock Time box. Press ADJUST or to select Lock Time. Press ADJUST or repeatedly to slowly select the hour or press and hold to quickly select the hour. Press ENTER to move to the minutes options. Press ADJUST or to select minutes, then press ENTER to select AM or PM Setting the Lock Time and Unlock Time to the same time will make the Lock by Time active 24 hours a day. Front Button Lock Front Button Lock lets you disable controls on the front panel to prevent anyone from changing settings by accident. Select ON to lock out the operations of the front panel buttons and select OFF to restore the operations of the front panel buttons. If the front panel buttons have been locked and you misplaced the remote control, you can restore the function of the front panel buttons by pressing and holding the MENU button on the front panel for more than 8 seconds. If the TV is already on, a message will be displayed to confirm the release of the Front Button Lock. Figure 22. V-Chip Menu, Lock by Time AudioVideo Menu Video Mute Video Mute lets you display a blue background when no signal is being received on Inputs 1-3, Components 1-2 and Input DTV. Black Enhancement Select On to enhance the contrast in bright scenes for better picture quality. Darker scenes will not be affected. TV Speakers This selection will turn on or off the TV’s internal speakers. You may select Off when sending the sound through a separate stereo system or surround sound A/ V receiver. When NetCommand® is enabled, selecting the A/V receiver icon from the Device Selection menu automatically turns Off the TV speakers. See the NetCommand information for further instructions. Note: To prevent damage from a sudden increase in volume, make sure the TV volume is set to low before setting speakers to ON. AudioVideo Figure 23 A/V Memory Reset A/V Memory Reset allows you to select the device which will have the A/V Settings returned to the original factory settings. To return a device’s memory to the original factory settings, select the device and then press ENTER. Settings Each device has its own A/V memory. Select the device in A/V Memory Reset, then select Audio or Video to adjust the device’s individual settings. Press ENTER, and the menu is removed and the individual settings are displayed. Use ADJUST or to select the individual settings to be adjusted. Use ADJUST or to make the adjustment. For descriptions of the individual A/V settings see A/V Setting Descriptions, pages 74 and 75. Figure 23. Audio/Video Menu, Settings Using the AUDIO or VIDEO Button on the Remote Control To adjust individual Audio or Video settings directly with the remote control: 1. Press AUDIO or VIDEO to cycle through the available settings. 2. Press ADJUST or to adjust the setting. After 5 seconds of inactivity, the setting display will disappear. A/V Setting Descriptions: Audio NOTE: The effects of the Audio Settings of Bass, Treble, Balance and Surround affect the sound heard through the TV speakers only. Analog and Digital Audio Setting A slider will display on-screen for most settings. When the slider is displayed it has a numeric value, where 63 is the maximum, 31 is the mid-point and 0 is the minimum. . Bass Enhances or reduces low-pitch sound. . Treble Enhances or reduces high-pitch sound. . Balance Adjusts the level of sound between the left and right speakers. . Surround Creates simulated stereo and surround effects through the TV speakers. Your choices are: • Off: No surround effects. • Surround Sound: Your TV will create a simulated surround effect when watching a stereo program. • Simulated Stereo: Your TV will create a simulated stereo effect when watching a non-stereo program. Analog Only Audio Settings . Listen to Determines how your TV will receive a broadcast audio signal and play back the sound you hear. Your choices are: • Stereo: Default setting. The TV will play stereo broadcasts in stereo and mono broadcasts in mono. The word “Stereo” will be displayed when you tune to a channel broadcasting stereo. • SAP (Second Audio Program): Additional monaural soundtrack that you cannot hear during normal TV viewing. The SAP signal might be related to the program you are watching, such as a soundtrack in a foreign language, or unrelated to the program you are watching, such as a weather report. If an SAP signal is broadcast, the letters “SAP” will be displayed when you tune to the channel. • Mono: Reduces background noise and should be used when receiving a weak stereo audio signal. All audio will be played mono with this setting. Listen to is not available for devices connected to the TV Inputs, Component inputs or 1394 devices. . Level Sound Turn On or Off to automatically equalize the volume level of programs containing significant level differences from one segment to another (for example, regular programming to c...

Descargar ahora

Introduzca dos números de la imagen: