Votos - , Puntuación media: ( )

Manual de usuario Hitachi, modelo WD-Y57aa

Fabricar: Hitachi
Tamaño del archivo: 5.11 mb
Nombre del archivo: 61ac062a-8893-465d-803a-33bf3b3c8500.pdf

Idioma del manual:

El documento se está cargando, por favor, espere

Descargar ahoraCerca

El documento se está cargando, por favor, espere

Descargar ahoraCerca

4. Press (RECORD). The TV will tune to the channel if needed. A red “R” temporarily displays next to the program listing to indicate the program will be recorded. 5. Press EXIT to return to TV viewing. Figure 4. A red “R” appears briefly in the ChannelView screen to indicate a scheduled recording. Time-Delayed Recording from ChannelView Set Up the Recording 1. Ensure that TV Energy Mode is set to Fast Power On and the TV clock is set to the correct time and day. See “Setup Menu” in chapter 3, “TV Setup.” 2. Perform steps 1 and 2 described above. Press to highlight the source channel from which you wish to record. 4. Press to view a list of future programs on that channel. 5. Press to highlight a future program. 6. Press (RECORD). A red “R” temporarily displays next to the program listing to indicate the program will be recorded. You can schedule a maximum of 32 recordings. 7. Press EXIT to close the menu. Confirm the Recording Setup 1. Press (RECORD) to open the Record menu. 2. Press GUIDE to open the Record List (figure 2) and view all scheduled recordings. Press CH / to page quickly through the list. 3. Verify that the program you wish to record appears in the list. 4. Press EXIT to close the menu. Cancelling Recordings To Cancel a Recording in Progress 1. Press INPUT to open the Input Selection menu. 2. Move the highlight to the source input icon. There is no need to press ENTER. The Input Selection menu displays an icon for an active recording connection. See the connection icon in figure 5. 3. Press CANCEL. The connection icon will disappear to indicate termination of the recording connection. 4. Press EXIT to return to TV viewing. Connection Icon Figure 5. The Input Selection menu displays an icon for the destination device of a recording in progress. To Cancel a Scheduled Recording 1. Press (RECORD) to open the Record menu. 2. Press GUIDE to open the Record List (figure 2) and view all scheduled recordings. Press CH / to page quickly through the list. 3. Highlight the program you wish to remove from the Record List and press CANCEL. 4. Press EXIT to close the menu. Chapter 6. NetCommand Functions NetCommand-Controlled Recording, continued Record Menu: Setting Recording Defaults The Record menu allows you to set defaults for your recording devices, set up recordings, view the Record List, and cancel scheduled recordings. Highlight the Record icon on the Main menu to view the Record menu. Figure 6. Record menu Record Setup Highlight Record Setup and press ENTER to display the Recording Setup menu, described earlier. Record List Highlight Record List and press ENTER to display the Record List, described earlier in this chapter. Default Digital (Recording) Device If you have more than one digital recording device connected, this option lets you specify which to use as the default. The device specified here is the digital recording device to use when initiating a recording with the (RECORD) key from within ChannelView™. This option remains grayed out (unavailable) until you connect a digital recording device. After the device is detected and named, highlight the box and press to select the recording device. Note that digital programs can be recorded on either a digital or analog device. For best playback quality, however, record digital programs on a digital recording device. Analog Recordings When you record a 16:9 digital channel to an analog VCR or recording device, there is a mismatch between the 16:9 ratio of the picture shape from the source and the narrower 4:3 ratio of the analog recorder. • For anamorphic playback on this widescreen TV, choose the anamorphic picture display and ensure that the TV screen format is set to standard (see the section on TV formats in this Owner’s Guide). • For cropped playback on an older style 4:3 TV, choose the cropped display to remove the top and bottom sections. This setting does not affect recording from analog devices, analog channels, or 4:3 digital channels. Copy-Protected Material When attempting to record copy-protected material, the record functions of the NetCommand and IEEE 1394 systems may be prevented or stopped. If you have a program that was originally tagged Record Once, NetCommand will change the tag to Record No More on the new recording. VCR Recording Setting Up Analog VCR Recordings with TV Guide On Screen® When setting up a recording using TV Guide On Screen, note that: • You must select the desired recording device in the TV Guide On Screen Record Options menu. If you have both analog and digital recording devices, always verify that the analog device is the default device before starting an analog recording with the (RECORD) key. • The destination recording device for analog recordings must be the analog device connected to the TV’s MONITOR OUT jacks. Restrictions for Traditional VCRs with NetCommand- and TV Guide On Screen-Controlled Recording • Your VCR must be connected directly to the MONITOR OUT VIDEO and LEFT/RIGHT outputs. IMPORTANT Wh...