Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
You can also access sub-menus from a button. Sometimes when you select a button, an automatic function begins. The system includes the following special features: • The currently selected icon or button is highlighted with a yellow outline; the text color is yellow. • On-screen instructions, shown in the message line at the bottom of the menu, provide feature selection and adjustment information. • Some on-screen menu options must be set before other options are available. Remote Control Buttons The following buttons on your remote control help you navigate within the system : 1. ADJUST or to select the menu item you want to change. 2. ADJUST or to change the settings. 3. ENTER to enter into a menu, start an automatic function or select a checkbox. 4. CANCEL to clear a setting or stop an automatic function. 5. TV MENU to display the main menu or move back one menu screen at a time. 6. HOME to exit all menus and return to TV viewing. Press ADJUST or to change text boxes. Some text boxes have preset labels. Other boxes allow you to select letters, numbers or characters to customize names. When customizing names, press ADJUST or to select letters, numbers or characters. Press ENTER to move to the next character position. Use CANCEL to erase letters, numbers or characters or move one space backward. QV DEVICEMENUHOME SQV SUB/CANCEL 0 TVMENUGUIDE MUTEDEVICECHVOL SUB/CANCELHOMETVMENU Main Menu: This screen will always be the first screen that appears when you press the remote’s TV MENU button. NetCommand® Initial Setup IMPORTANT You may use your TV without setting up NetCommand. You may also set up NetCommand at a later time by choosing the NetCommand menu from the Main menu, then selecting Initial. When you first power On your new Mitsubishi TV, the initial setup screens appear. Most IR remote control signal formats can be learned by NetCommand. Welcome Screen Figure 1 When you first turn on your TV, the Welcome screen displays and asks you to select either English or Spanish as the language for the on-screen menus. The default language is English. To change Language later, select Setup in the Main Menu. Selecting Cancel at this screen will cause the default language (English) to be selected. Device Setup Screen Figure 3 If the devices connected to the TV are already in NetCommand memory, you can quickly select them at this screen. Press ADJUST or to move to each device type. Press ADJUST or to select the manufacturer. Select “Other” if the manufacturer is not listed. Later, you can use the Change setting in the Edit NetCommand menu to learn the remote control signals for this device. Select “None” for device types that are not connected. For the A/V Receiver, if the manufacturer is not listed, you cannot select “Other”. Instead, select “None”. Later, you can use the “Add” feature in the NetCommand menu to have the TV add and learn the remote control signals for this device. If you have a camcorder connected, check the Camcorder box. NetCommand will not be able to control it, but will reserve the front input to use with the camcorder. After completing your choices, select Next> and press ENTER. Figure 1. Welcome screen NetCommand (Information) Screen Figure 2 The NetCommand (Information) Screen describes how to start or delay the initial NetCommand Setup. This screen displays automatically the first time you power On your new TV, after the Welcome screen. If the NetCommand Setup is cancelled before it’s completed, you can restart the NetCommand setup by: 1. A press of TV MENU on the remote control to display the TV Main menu. 2. Select NetCommand. The available options will be: Add, Review or Initial. Change and Delete will be grayed out. 3. Press ADJUST , , or to select Initial. 4. Press ENTER. The Device Setup screen displays. Figure 2. Information screen Figure 3. Device Setup screen NetCommand® Initial Setup, continued Finish Screen Figure 5 To complete the NetCommand setup, select Finish from the Finish screen. If you wish to change any of the pre- configured inputs or names for the devices, or add devices not in the pre-configured setup, select Edit to display Edit NetCommand menu. If your A/V receiver was not listed, select Edit to add the AVR and then assign all devices to new AVR inputs. It is still necessary to memorize the available channels for Antenna-1 (and Antenna-2, if used). You may do that by going to the TV Main menu and selecting Antenna. Instructions to memorize channels are found in the Antenna menu section. Note: If you selected “Other” for any of the device names, the TV can “Learn” the connected device by following the Edit NetCommand instructions. For many device types, non-listed models will operate in the same way as the listed models and you can still use the pre-loaded setting. Review Screen Figure 4 After you have made your device choices the Review Screen will display. It is important to review the settings to ensure that they are correct. If necessary, you can use
TV - WD-52725 (5.29 mb)
TV - WD-52725 (5.29 mb)
TV - WD-62525 (5.29 mb)
TV - WD-62525 (5.29 mb)