Votos - 2, Puntuación media: 5 ( )

Fabricar: Hitachi Tamaño del archivo: 4.66 mb Nombre del archivo: Idioma del manual:

Also, Anamorphic DVDs are usually marked “Anamorphic” or “Enhanced for 16:9 TVs.” 0 Standard Default format for DTV and Component Input displays a full-screen format. The Standard format displays Anamorphic DVDs that have the 1.78:1 or 1.85:1 aspect ratios. However, Anamorphic DVDs that have the 2.35:1 aspect ratio still display black bars at the top and bottom of the screen, while narrow (4:3) images are stretched evenly from side to side. Q Expand (480i/480p) Enlarges the picture, cropping some of the image at the top and bottom. The Expand format is useful to reduce the letterbox top and bottom bars of non-Anamorphic DVDs or to correct narrow 4:3 images that have been stretched in the Standard format. Note: Expand is not available in the 1080i format. Q Expand HD (1080i) Enlarges the picture, cropping some of the image on both sides. This Expand format is useful to remove or reduce black side bars on HD broadcasts of 4:3 images with black bars (See page 64). Note: Expand HD is only available in the 1080i format. 62 Zoom Enlarges the picture, cropping some of the image at each side, top and bottom. The Zoom format is useful to remove or reduce the black top and bottom bars on Anamorphic DVDs with 2.35:1 aspect ratio. Note: This format is not available in the 1080i signal. Q Stretch Default format for Ant-A and Ant-B, and Inputs 1-3. The Stretched format stretches narrow 4:3 images across the screen, however, there is less stretch in the center than the sides. Note: Stretch is not available in the 1080i format. Q Stretch Plus (not available on WT-42413) Similar to stretch mode, however to minimize distortions on the side, the picture is expanded to crop off portions of the top and bottom. Useful when no important information is shown at the top and/or bottom of the screen. 0 Narrow Displays narrow 4:3 images in their original shape and adds stationary gray side bars to fill the screen. Caution should be observed when using the Narrow format due to the stationary gray side bars. Note: This format is not available in the 1080i signal. □ Available On-Screen Format Sizes, continued Widescreen Picture (16:9 - HD 1080i only) Example: A True HD Broadcast Standard (Recommended) HD Expand (Recommended for 4:3 images with Black Side Bars) Widescreen Picture (480i/480p) Standard (Recommended) !>xpam Zoom (For letterbox 2.35:1 DVDs) Stretch Plus (not available for WT-42413) Narrow (Not Recommended) 63 Operation of PIP and POP Picture Inside Picture (PIP) vs. Picture Outside Picture (POP) You have the option to view two TV shows or inputs at the same time. For example, you can watch a game show and a sports event on another channel, or a DVD movie and more. The PIP option allows you to view another input as a picture-inside-picture. The POP option allows you to view a main picture and another input as a side-by-side or three or nine pictures-outside-picture at the side (only one moving POP). MAIN PICTURE Side-by-Side POP 1 MAIN PICTURE POP2 POP3 POP 1 POP2 POP3 MAIN POP 4 POP 5 POP 6 PICTURE POP 7 POP 8 POP 9 Ant-A 002 KCBS PIP A 017 480i Standard TV-PG DLSV SQV-1 Ant-A 002 KCBS PIP A 017 480i Standard TV-PG DLSV SQV-1 Changing PIP/POP Devcices Press PIP DEVICE to browse through available PIP or POP images. Changing PIP/POP Channels Press PIP CH to scroll up or down through memorized channels on the Ant-A and Ant-B. Exchanging Program Images Press ENTER or EXCH to exchange the main picture with the PIP/POP picture. Moving PIP Images Press ADJUST A, ▼, 4, or ► to move the PIP display anywhere on the main screen. Automatic POP Switching Press PAUSE to activate/pause automatic POP switching. When automatic POP switching is activated, the TV cycles through memorized channels, or strobes pictures from other A/V components in the POP display. Selecting POP “Live” Image Press ADJUST ▲, ▼, A, or ► to select a different POP “live” image. Freeze the PIP and Side-By-Side Picture Press PAUSE in the TV layer to freeze the PIP and side-by-side images. Press Pause again to return to a «1 • V • “live” image. 64 Appendix A: Bypassing the V-Chip Lock Bypassing the V-Chip Lock After you set the lock, you need your passcode to view a V-Chip locked program, view the locked TV, cancel the lock, or enter the V-Chip lock menus. If you forget your passcode, you can view the locked TV without entering your passcode. When your password is requested, press the number 9 and QV buttons on the remote TV control at the same time. This process temporarily unlocks the TV. When entering the V-Chip Lock menu, this process deletes your old passcode and prompts you to enter a new passcode. ¡IMPORTANT | , Cut along the dotted line and file bypass instructions in a sale place for future reference. IMPORTANT 65 When changing or deleting your passcode, you must use the remote control included with this TV You cannot use a Mitsubishi remote control from another component or a “...

Descargar ahora

Introduzca dos números de la imagen: