Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
When lit, you can use the laser to draw your audience's attention to a red dot that you can place on any object within 30 feet (10 m). 12 Menu Button Use this button to call up the On-Screen Menu so you can adjust and set the image. After you press this button, it will light up. During this time you can use the mouse pad and right/left click buttons to make menu selections. If no buttons are pressed within 10 seconds while it illuminates, the 12 11 light goes out. To return to the main menu from a submenu, press this button again. 13 13 Mouse Pad(st §© /+ -) Works as a mouse for your projected computer image. This pad is also used to adjust position. This pad selects the submenu you want to adjust. (See page 63.) 14 After you make your on-screen menu selection, use this pad to adjust the level up or down. (See page 63.) 17 15 16 14 Right Click/Cancel Button Press this button to exit "Menus" or "Pointer." 18 15 Freeze Button This button will freeze a picture. Press again to resume motion. 16 Picture Mute Button This button turns off the image for a short period of time. Press again to restore the image. 17 Pointer Button Use this button to move your Pointer icon to the area you want on the screen, then press the Magnify button on the remote control to enlarge the selected area on the screen. When you're finished, the "Pointer" button will remain lit for 10 seconds. NOTE: * Eight kinds of Pointers (icons) are available. You can select one from the Settings Menu. The magnifying glass icon is selected at the factory. See page 74 for more details. * With the Pointer button pressed, the Mouse Pad is used to move the picture. 18 Volume Button Press (+) to increase the volume and (-) to decrease it. 15E INTRODUCTION 28 29 Remote Control Precautions • Do not look into the laser pointer while it is on. • Do not point the laser beam at a person. • When the cable is connected to the remote control, it will not work in the wireless mode. • Handle the remote control carefully. • If the remote control gets wet, wipe it dry immediately. • Avoid excessive heat and humidity. • If you will not be using the remote control for a long time, remove the batteries. • Do not mix new and old or different types of batteries. 19 Slide Button Press (+) to advance the next file or slide and (-) to return to the previous file or slide. (the optional MT Viewer board required) 20 Magnify Button Use the (+) or (-) button to adjust the image size up to 400%. When the Pointer is displayed, the magnified image is displayed at the center of the Pointer. When the Pointer is not displayed, the magnified image is displayed at the center of the screen. 21 Keystone Button Press the (+) or (-) button to correct the keystone (trapezoidal) distortion, and make the image square. 22 Focus Button Press the (+) or (-) button to adjust the focus. 23 Zoom Button Press the (+) button to zoom in and the (-) button to zoom out. 24 Remote Jack Connect your remote control cable here for wired operation. NOTE: You cannot use Menu and Pointer at the same time. OFF ON PC CARD VIDEO RGB 1 MENU R-CLICK/CANCEL LASER SLIDE VOLUME S-VIDEO POINTER MAGNIFY PIC-MUTE FREEZE RGB 2 + – +– + – + – FOCUS KEYSTONEZOOM + – + – + – POWER 19 20 21 22 23 24 INTRODUCTION 29 Remote Control Precautions • Do not look into the laser pointer while it is on. • Do not point the laser beam at a person. • When the cable is connected to the remote control, it will not work in the wireless mode. • Handle the remote control carefully. • If the remote control gets wet, wipe it dry immediately. • Avoid excessive heat and humidity. • If you will not be using the remote control for a long time, remove the batteries. • Do not mix new and old or different types of batteries. 19 Slide Button Press (+) to advance the next file or slide and (-) to return to the previous file or slide. (the optional MT Viewer board required) 20 Magnify Button Use the (+) or (-) button to adjust the image size up to 400%. When the Pointer is displayed, the magnified image is displayed at the center of the Pointer. When the Pointer is not displayed, the magnified image is displayed at the center of the screen. 21 Keystone Button Press the (+) or (-) button to correct the keystone (trapezoidal) distortion, and make the image square. 22 Focus Button Press the (+) or (-) button to adjust the focus. 23 Zoom Button Press the (+) button to zoom in and the (-) button to zoom out. 24 Remote Jack Connect your remote control cable here for wired operation. NOTE: You cannot use Menu and Pointer at the same time. OFF ON PC CARD VIDEO RGB 1 MENU R-CLICK/CANCEL LASER SLIDE VOLUME S-VIDEO POINTER MAGNIFY PIC-MUTE FREEZE RGB 2 + – +– + – + – FOCUS KEYSTONEZOOM + – + – + – POWER 19 20 21 22 23 24 INTRODUCTION 30 INSTALLATION 2 31 INSTALLATION 2 31 Setting Up Your MultiSync MT830+/MT1030+/ MT1035+ LCD Projector Attaching the lens cap to the lens hood Your MultiSync MT830+/MT1030+/MT1035+ LCD Projector is simple to set Lens cap with the supplie...
Otros modelos de este manual:TV - MT1030+ (1.26 mb)
TV - MT1035+ (1.26 mb)