Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
SETUP PRESS MENU TO EXIT Displays Main Menu Jm- SET UP T Mmmm 1:26 AM SET DAY SUN MODE TV/ANT CABLE AUTO PROGRAM NO YES MANUAL PROGRAM NO YES DISPLAY STEREO NO YES PRESS MENU TO EXIT Select Or Adjust Feature When Set Time (Clock) - Clock (when set) will display on screen at initial ‘Turn On”, channel change and when pressing Recall. 1. Press the MENU button to display the Main Menu. 2. Press the ADVANCE A or ▼ button repeatedly until Set Up is highlighted. 3. Press the ADVANCE * or ► button to display the Set Up Menu. 4. Press the ADVANCE A or ▼ button to Set Time hour position. 5. Pressthe ADVANCE ^ or ► buttonto Set Hours (set AM/PM accordingly). 6. Press the ADVANCE ▼ button to highlight minutes position. 7. Pressthe ADVANCE 4 or ► button to set minutes. *► MAIN MENU 1. SOUND ADJUST 2. PICTURE SETTINGS PRESS MENU TO EXIT SET UP ▼ ISETTIMEj 1:26 AM SET DAY SUN MODE TV/ANT CABLE AUTO PROGRAM NO YES MANUAL PROGRAM NO YES DISPLAY STEREO NO YES PRESS MENU TO EXIT -26- Set Day - The day of the week must be set property in order to operate the dual timer feature. 1. Press the MENU button to display the Main Menu. 2. Press the ADVANCE A or ▼ button repeatedly until Set Up is highlighted. 3. Press the ADVANCE ^ or ► button to display the Set Up Menu. 4. Press the ADVANCE A or Y button until Set Day is highlighted. 5. Press the ADVANCE ^ or ► button to select proper day of the week. » MAIN MENU 1. SOUND ADJUST 2. PICTURE SETTINGS 3. ADVANCED FEATURES PRESS MENU TO EXIT A •mm- Y SET TIME SETUP 1:26 AM SUN MODE TV/ANT CABLE AUTO PROGRAM NO YES MANUAL PROGRAM NO YES DISPLAY STEREO NO YES PRESS MENU TO EXIT TV/ANT-Cable Tuning Mode - Important Note: The proper input mode must be selected for the type of signal at the antenna input. • TV/ANT is used when the Receiver is not connected to a Cable TV System, for example, when using a VHF/ UHF antenna (Channels 02-69). • CABLE is used when the Receiver is connected to a Cable TV System and you are not using a cable company converter box (Channels 01-125). NOTE: Some Cable TV Systems encode (scramble) program material on specific channels. A cable company supplied decoder is required to reproduce an acceptable picture. Certain Cable TV Systems offset some channels to reduce interference. It will be necessary to use the cable company supplied converter to receive these specific channels. 1. Press the MENU button to display the Main Menu. 2. Press the ADVANCE A or T button repeatedly until Set Up is highlighted. 3. Press the ADVANCE ^ or ► button to display the Set Up Menu. 4. Press the ADVANCE A or ▼ button until MODE is highlighted. 5. Press the ADVANCE 4 or ► button to select proper Input Mode. W- MAIN MENU 1. SOUND ADJUST 2. PICTURE SETTINGS 3. ADVANCED FEATURES IllSjptl PRESS MENU TO EXIT SET UP ▼ SET TIME 1:26 AM SET DAY SUN mmm tv /ant cable AUTO PROGRAM NO YES MANUAL PROGRAM NO YES DISPLAY STEREO NO YES PRESS MENU TO EXIT Auto Programming - The Auto Programming feature allows you to place all channels with a video signal into channel scan memory so when you press the CHANNEL A or T button only those channels with a video signal will be accessed. CHANNEL NOTE: TV/ANT-Cable tuning mode must be set properly for your system. 1. Press the MENU button to display the Main Menu. 2. Press the ADVANCE A or T button repeatedly until Set Up is highlighted. 3. Press the ADVANCE^ or ►button to display the Set Up Menu. 4. Press the ADVANCE A or T button until Auto Program is highlighted. 5. Press the ADVANCE ► button to start Auto Programming Scan. Channels will automatically advance until all channels have been scanned. • Channel numbers with video signal present will turn blue which indicates stored in channel scan memory. NOTE: After Auto Programming Scan has completed, up to 15 channels will be programmed into the FAVORITE Channel Scan if space is available. Any original channels that were programmed into FAV CHANNEL will remain. MAIN MENU 1. SOUND ADJUST 2. PICTURE SETTINGS 3. ADVANCED FEATURES SET UP ▼ SET TIME 1:26 AM SET DAY SUN MODE TV/ANT CABLE llllilil! PRESS MENU TO EXIT wmmmmmmä no yes MANUAL PROGRAM NO YES DISPLAY STEREO NO YES PRESS MENU TO EXIT -27- rC3332h REW STOP PLAY POWER CH #REC MPAUSE CD COD CD TV/VCR CD FF F.ADVII* CD POWER CD A CH V CABLE 100 VIDEO NORM MENU EH □ □ S SLEEP AIC ANT □ □ □ PICTURE FREEZE SEARCH SWAP CH PIP CD CD CD CD AUDIO SIZE REPLAY SWAP TV/VIDEO OOO VO Helpful Hints: After Auto Programming: Blue channel number indicates channel is in Channel Scan memory. Yellow channel number indicates channel is not in Channel Scan memory. All channels are available by direct access using the keyboard numbers “0 through 9” and the “100” button. The “Stereo-SAP-Mono” display can be eliminated during channel change by selecting “No” when display Stereo Menu is highlighted. RECALL button will allow you to review the Stereo-SAP-Mono Me...