Votos - 3, Puntuación media: 3 ( )

Fabricar: Panasonic Tamaño del archivo: 4.95 mb Nombre del archivo: Idioma del manual:

Firmly connect the cable to the connector. Connect three or more speakers for surround sound. Speakers (example) Use the diagram below to connect the Digital Audio Output of your Projection Display to a Dolby Digital decoder. Dolby Digital 5.1 channel surround sound delivers digital-quality sound. Dolby Digital provides five discrete full-bandwidth channels for front left, front right, center, surround left and surround right, plus a LFE (Low Frequency Effect) subwoofer channel, For a full Home Theater sound experience, an external Dolby Digital decoder and a multichannel amplifier must be connected to the Digital Audio Out jack on the unit. Procedure Connect the Digital Audio cable from the Digital Audio Out jack on the unit to the Digital Audio In connection on the Dolby Digital decoder. Notes: • When ATSC channel is selected, the output from the Digital Audio Out jack will be Dolby Digital. But, if NTSC channel is selected, the output will be PCM. • Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical output. Digital Audio Out Amplifier with built in Dolby Digital decoders. Installation (continued) How to connect the PC IN Terminals Connecting a PC to PC IN COMPUTER RGB OUT AUDIO OUT Audio cable (M3 stereo mini pin-PIN cable) Connect a cable which matches the audio output terminal on the computer. Conversion adapter (If necessary) RGB cable (D-SUB 15P) (Not included) Audio Input Connector (Shared with both Video 3 and PC) PC IN Terminal (D-SUB 15P) Pin Layouts Pin No. Signal name Pin No. Signal name 1 R 9 NC 2 G 10 Ground 3 B 11 NC 4 NC 12 NC 5 NC 13 HD/CSYNC 6 Ground for R 14 VD 7 Ground for G 15 NC 8 Ground for B 1 678 3 9 45 10 15 14 13 12 11 2 Connection port view NC: Not connected Notes: • Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable (D-SUB 15P) (Not included) to connect a Macintosh computer to the set. There is no need to use an adapter for computers with PC / AT compatible D-SUB 15P terminal. • The computer shown in the illustration is for example purposes only. Additional equipment and cables shown are not supplied with this set. • Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range. • Select the desired PC input position by pressing the TV/VIDEO button. (P. 32) For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: RGB signals that can be input The table below lists the different types of RGB signals that can be input. If a signal which differs greatly from the types listed below is input, the picture may not be displayed correctly, or a black background may be displayed. In this case, “signal” will flash on-screen for about 5 seconds. Mode type Signal data Information menu displayNo. of dots (H . V) Horizontal frequency (kHz) Vertical frequency (Hz) Personal ComputerSignals VGA400 (70 Hz) 640 . 400 31.47 70.08 VGA400 VGA480 (60 Hz) 640 . 480 31.47 59.94 VGA480 SVGA (60 Hz) 800 . 600 37.88 60.32 SVGA * XGA (60 Hz) 1 024 . 768 48.36 60.00 XGA Notes: • Input signals, other than those listed with a * mark, will give you a beautiful, stable picture. • The D-SUB15P connector can accept RGB (H-V sync separate). • When an external video processor/scaler is used, it must have RGB (H-V sync separate) output. Getting ed Installation (continued) How to connect the HDMI input terminal About HDMI HDMI is the first all digital consumer electronics A/V interface that supports several uncompressed standard, enhanced and high definition video format as well as all existing multi-channel audio formats. One jack supports both video and audio information. The HDMI/HDCP*1 input can be connected to an EIA/CEA 861/861B*2 compliant consumer electronic device, such as a set top box or DVD player equipped with a HDMI output connection. By inputting a High-bandwidth Digital Content Protection (HDCP) high definition picture source to the HDMI terminal of this unit, high definition pictures can be displayed on the screen in their digital form. The HDMI input terminal is not intended to be used with personal computers. This unit is compatible with 1080i, 720p, 480p and 480i formats. Select the output of the connected device to match that of the unit. Connection diagram Follow the diagram below to connect the unit to a set top box or a DVD player. When audio signal input is digital. Set top box (PT-44LCX65/ PT-52LCX65/ (PT-52LCX35/ PT-61LCX65) PT-61LCX35) HDMI OUT The connector on the unit is HDMI Type A connector. For models PT-52LCX35/PT-61LCX35 : • Similar connections are available at the HDMI Input 1-2 Terminals. (P. 11) When audio signal input is analog. Set top box AUDIO OUT HDMI OUT The connector on the unit is HDMI Type A connector. For models PT-52LCX35/PT-61LCX35 : • Similar connections are available at the HDMI Input 1-2 Terminals. (P. 11) • When AV IN ...

Descargar ahora

Introduzca dos números de la imagen: