Votos - 3, Puntuación media: 4 ( )

Fabricar: Panasonic Tamaño del archivo: 5.15 mb Nombre del archivo: Idioma del manual:

10.Press OK to enter the Caption. ¦Edit (Favorite) 1. Press OK to display the Set favorite menu. (p. 31) ¦Edit (Add) Setting of register/delete in Program channel. 1. Press OK to select “Yes” or “No”. 12.Press RETURN to move cursor to “Apply”. Edit Apply Cancel Manual program 1 ... Yes... 2 ... Yes... 3 ... Yes... 4 ... Yes... 5 ... Yes... 6 ... Yes... 7 ... Yes... 8 ... Yes... Channel Caption Favorite Add Prev. page Next page YG B OK Select RETURN R 13.Press OK to enter your program. ---Caption Apply Cancel --Caption detail Projection Display Operation Projection Display Operation Component 1 Signal of source connected to COMPONENT VIDEO INPUT 1 is displayed. Component 2 Signal of source connected to COMPONENT VIDEO INPUT 2 is displayed. HDMI 1 Signal of source connected to HDMI IN 1 is displayed. HDMI 2 Signal of source connected to HDMI IN 2 is displayed. HDMI 3 Signal of source connected to HDMI IN 3 is displayed. Signal of source connected to VIDEO INPUT Video 1 1 is displayed. Signal of source connected to S VIDEO INPUT is displayed. Video 2 Signal of source connected to VIDEO INPUT 2 is displayed. Video 3 Signal of source connected to VIDEO INPUT 3 is displayed. PC Signal of source connected to PC IN is displayed. Note • If SKIP is set as the Input Label setting, the mode will not be changed. (p. 50) ¦Card input mode (Photo viewer) is selected. Procedure Selecting Input Mode Procedure 1. Press SD to display Photo viewer mode. Photo Signal of source connected to CARD SLOT (Photo viewer) is displayed. 1. Press TV/VIDEO to display the Input select menu. Rapid Tuning Switches between the current and last channel or input 2. Press corresponding NUMBER keys to select modes. the input of your choice. Or, press ^Ў to Procedure select the input of your choice, then press OK. 1. Press R-TUNE to switch to previously viewed •If, during selection, no action is taken for several seconds, channel or input modes. the Input selection menu is exited and the current input is automatically selected. Note TV Component 1 Component 2 HDMI 1 HDMI 2 HDMI 3 Video 1 Video 2 Video 3 PC 1 2 3 4 5 6 7 8 9 0 Input select • When Photo viewer (p. 46) is used, Rapid Tuning is not available. Using the CH/ VOL Button ¦Select desired channel: Press CH > < or NUMBER keys. ¦Adjust to desired volume level: Press VOL+ or VOL-. Basic Notes • The channel number and volume level are stored even after the unit is turned off. • Power consumption can be reduced if the volume level is lowered. Channel and Program Tuning Projection Display operation (continued) Unit Status Display Channel and Program Tuning Projection Display operation (continued) Unit Status Display Channel and Program tuning in digital television differs Press CH > < or RECALL, except when the MENU from conventional television. With DTV, many programs can exist within a single 6 MHz channel. These channels behave as sub-channels within a single channel. When tuning to a digital channel, the unit will also tune to a program and will indicate the channel and program in the on-screen Channel Banner display. In order to select channels properly, Auto program must screen is displayed, to display current unit status information. Channel Banner: Minimized Procedure be performed. (p. 26-27) 1. Press CH > < to minimize the displayed Follow the procedure below to directly enter the channel channel banner. number using the NUMBER keys. • It will display the channel number, and the station identification (if available). Select analog channel Channel Number Channel NumberChannel Number Procedure 15-2 ABC-HD 1. Press the NUMBER keys to enter the Channel number. Press OK. • The following is an example of tuning to channel 15. Station Identifier Station IdentifierStation Identifier Direct Tuning Example Direct Tuning ExampleDirect Tuning Example Channel Banner Display 1 15 15 Step Action Channel Banner: Maximized Procedure 1 Press 1 2 Press 5 3 Press OK 1. Press RECALL to maximize the displayed channel banner. Note • If, during channel selection, no action is taken for several Channel, Program and Station identifier Channel, Program and Station identifierChannel, Program and Station identifier seconds, the Channel Banner is exited and the currently input Program title Program titleProgram title channel is automatically selected. Closed Caption Closed CaptionClosed Caption Rating Level Rating LevelRating Level Picture mode Picture modePicture mode Time remaining Time remainingTime remaining in Sleep Timer in Sleep Timerin Sleep Timer 1. If tuning a digital channel and your channel contains more than one program, press SAP indication SAP indicationSAP indication Signal resolution Signal resolutionSignal resolution CC SAP Andrew’s cooking show TV-G 4:31080i Standard 15-2 ABC-HD 30 Select digital channel Procedure Aspect ratio Aspect ratioAspect ratio PROG- and enter the program (1, 2, 3 etc.) using the NUMBER keys. Press OK. • The following is an example of tuning to channel 15-1. Audio Mute Press ...

Descargar ahora

Introduzca dos números de la imagen: