Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
If no button is pressed in 5 seconds the light goes out to conserve the battery. 8 For assistance, please call : 1-800-211-PANA(7262) or send e-mail : consumerproducts@panasonic.com 9 Front View of the Unit and Indicators AUDIO/VIDEO IN Connector 2 (LINE 2) Connect from other component. POWER (See previous page.) VOLUME UP/DOWN (See previous page.) CHANNEL UP/DOWN (See previous page.) STOP (See previous page.) SKIP | (See previous page.) PLAY (See previous page.) SKIP | (See previous page.) PAUSE (See previous page.) PHONES Connect an earphone or headphones. SLEEPTIMER Indicator Lights when the Sleep-Timer is set. ON TIMER Indicator Lights when the On-Timer is set. ANGLE Indicator Lights when a scene recorded at a different angle is detected. Remote Sensor Aim the remote to this point. Disc Tray Insert a disc to this tray. OPEN/CLOSE (See previous page.) Rear View of the unit AC Power Plug When plugged into an AC outlet, the unit consumes 3.5 W of electric power in OFF condition. Optical Digital Audio Output Connector Connect to a Dolby Digital decoder or dts decoder. For details, see page 15. VHF/UHF Antenna Input Terminal In from your Antenna or Cable. AUDIO/VIDEO OUT Connector Connect to other component. AUDIO/VIDEO IN Connector 1 (LINE 1) Connect from other component. * PV-27D52 Rear shown. 10 For assistance, please call : 1-800-211-PANA(7262) or send e-mail : consumerproducts@panasonic.com Initial Setup (Ready to Play) For ANT./Cable Connect the cable from Antenna/Cable to the VHF/ UHF terminal on the unit. For DSS/Cable Box Connect the OUT jack on your cable box to the VHF/ UHF terminal on the unit with a RF cable. UNIT IN from VHF/UHF ANT./CABLE WARNING: Overtightening "Nut type" RF coaxial cables may damage jacks. Finger tighten only. Cable TV Converter Box Connecting Plug the unit power cord into 1an AC wall outlet. 3 2 • If you use a cable box, turn it on and set it to the Public Broadcasting Service (PBS) channel in your time zone. If you use a DSS receiver, it must be turned off. Initial Setup (Ready to Play) Please make all cable or antenna connections before powering on. Press POWER* on the remote or unit. The unit comes on and auto channel and clock set starts. CH AUTO SET PROCEEDING Settings are made automatically. When setup is done, this screen appears. PROCEEDING AUTO CLOCK SET CANCEL : PRESS STOP KEY If AUTO CLOCK SET IS INCOMPLETE screen appears, set the clock using MANUAL CLOCK SET procedure on next page. PLEASE SET CLOCK BY PRESS I NG ACT I ON KEY AUTO CLOCK SET I S I NCOMPLETE 2 / 6 / 2002 WED 12 : 00PM DST : ON AUTO CLOCK SET COMPLETED SETT I NG : CH 1 0 VHF/UHF PV-27D52 Rear shown. IN from ANT./CABLE VHF/UHF VHF/UHF *Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. Manual Clock Set *Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. Manual Clock Set Initial POWER SELECT ACTION LIGHT TITLE MENU DISPLAY ADD/DLT PAUSE DSS CABLE +SKIPSKIP PLAY STOP SLOW/SEARCH + VOL CH CH VOL 10 SUB TITLEANGLE ZOOM AUDIO OPEN/CLOSE CLEARENTER MUTE SURROUND TIMER R-TUNE ACTION RETURN D V DFM/TV S E T SET If AUTO CLOCK SET was incomplete, manually set the clock as follows. 1 1 Press ACTION on the Remote to display SET CLOCK Menu screen. SET : SET SELECT : END : ACT I ON SET CLOCK DST : ON SELE CT MONTH 2 2 Press to select the month and press SET to set. In the same manner, select and set the date, year, time, and DST. Press ACTION twice to start CLOCK3and exit. DST (Daylight Saving Time) Unit auto adjusts clock for DST (Daylight Saving Time.) ¦ Spring (First Sunday in April) DST : ON ->Sets clock ahead one hour. ¦ Autumn (Last Sunday in October) DST : ON ->Turns clock back one hour. • If your area does not observe Daylight Saving Time, select DST:OFF. Note to CABLE System Installer This reminder is provided to call the CABLE (Cable TV) System Installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Reset all unit Memory Functions When moving unit to a new location, or if a mistake was made in the Initial Setup section. Turn the unit Power on.1 Press and hold both PLAY and | on the unit for more than 5 seconds.2 • The power will shut off. 3Perform “Initial Setup” on page 10. 11 Reset Language, Channels, Clock, Reset Language, Channels, Clock, Press ACTION* to display MAIN MENU. 1 MAIN MENU DVD LOCK CHCLOCKTV LANGUAGE END :ACT I ON SELECT : SET:SET 5 3 1 2 2 Clock Channels Language 1) Press 1) Press 1) Press to select “CLOCK.” to select “CH.” to select language icon. MAIN MENU DVD LOCK CHCLOCKTV LANGUAGE END :ACT I ON SELECT : SET:SET 5 3 1 MAIN MENU DVD LOCK CHCLOCKTV LANGUAGE END :ACT I ON SELECT : SET:SET 5 3 1 2) Press SET repeatedly. MAIN MENU DV...
Otros modelos de este manual:TV - PV25D52 (2.1 mb)
TV - PVD27D52 (2.1 mb)