Votos - 6, Puntuación media: 3.5
(
)
)
|
Resumen del manual
.To prevent the spread of fire, keep candles or other open flames away from thisproduct at all times ¦AC Power Supply CordTo prevent fire or electric shock: .The Plasma TV is designed to operate on a 120 V AC, 60 Hz service. Insert the power cord plug as far as it willgo into the wall socket. If the plug is not fully inserted, heat may generate, which could cause a fire. .The included power cord is for use with this unit only. .Do not use any power cord other than that providedwith this TV. .Do not handle the power cord plug with wet hands. .Do not do anything that might damage the powersupply cord. .When disconnecting the power supply cord, hold theplug, not the cord. .Do not use the power supply cord if the plug or cord isdamaged. Replace the cord or contact your Authorized Service Center. .Do not use a 3-prong to 2-prong AC plug adapters to connect your TV’s plug to the wall outlet. Doing so will defeat the TV plug’s safety feature, which can lead to a shock hazard. If the wall outlet does not accommodate a 3-prong plug, have a qualified electrician replace your outlet and check the associated wiring. ¦Handling the power supply cord .Insert the power plug fully into the socket outlet. (If thepower plug is loose, it could generate heat and cause fire.) .Ensure that the power plug is easily accessible. .Ensure the earth pin on the power plug is securelyconnected to prevent electrical shock. • An apparatus with CLASS I construction shall be connected to a power socket outlet with a protective earthing connection. .Do not touch the power plug with a wet hand. (This maycause electrical shock.) .Do not use any power cord other than that providedwith this TV. (This may cause fire or electrical shock.) .Do not damage the power cord. (A damaged cord may cause fire or electrical shock.) • Do not move the TV with the cord plugged in the socket outlet. • Do not place a heavy object on the cord or place the cord near a high-temperature object. • Do not twist the cord, bend it excessively, or stretch it. • Do not pull on the cord. Hold onto the power plug body when disconnecting cord. • Do not use a damaged power plug or socket outlet. .If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma TV, unplug the power supply cord immediately. Continued use of the TV under these conditions might cause a fire or permanent damage to the TV. Have the TV evaluated by an Authorized Service Center. Servicing of the TV by unauthorized personnel is strongly discouraged due to its high voltage. .If water or an object gets inside the Plasma TV, if the Plasma TV is dropped, or if the enclosure becomesdamaged, unplug the power supply cord immediately. A short-circuit may occur, which could cause a fire. Contact an Authorized Service Center for an evaluation. CAUTION .Do not cover the ventilation holes. Doing so may cause the Plasma TV to overheat, which can cause a fire or damage to the Plasma TV. .Leave a space of 3 15/16” (10 cm) or more at the top, left and right, and 2 3/4” (7 cm) or more at the rear. .When using the pedestal, keep the space between thebottom of the TV and the pedestal or stand surfaceclear from objects that may obstruct ventilation. ¦When Moving the Plasma TV .Be sure to disconnect all cables before moving thePlasma TV. Moving the TV with its cables attached might damage the cables which, in turn, can cause fire or electric shock. .To prevent an electric shock, disconnect the power plug from the wall outlet as a safety precaution beforecarrying out any cleaning. .Transport only in upright position. Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry. .Using a dry cloth, clean any dust from the power supplycord and plug regularly. Build-up of dust on the power cord plug can increase humidity, which might damage the insulation and cause a fire. This Plasma TV radiates infrared rays; therefore, it may affect other infrared communication equipment. Install your infrared sensor in a place away from direct or reflected light from your Plasma TV. The TV will still consume some power as long as thepower supply cord is connected to the wall outlet. .Display panel is made of glass. Do not apply strongforce or impact to the display panel. This may cause damage resulting in injury. .The TV is heavy. TV should be handled by 2 or more people. Support as shown to avoid injury by the TVtipping or falling. CEA CHILD SAFETY NOTICES CEA CHILD SAFETY NOTICES WARNING Flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause personal injury or even death. The consumer electronics industry (of which Panasonic is a member) is committed to making home entertainment enjoyable and safe. To prevent personal in...