Votos - 2, Puntuación media: 5
(
)
)
|
Resumen del manual
AdvancedsetupAuto power on Image viewerauto play First time setup About Reset to defaults Turns TV On automatically when the cable box or connected device is turned On (No/Yes) TV AC cord must be plugged into this device. TV turns on every time the power is restored.• The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set. Sets the “Thumbnail” or “Slideshow” to play back SD cards automatically. (Slideshow/Thumbnail/Set later/Off) Restarts the first time setup from “Language” setting. Displays TV version and software license. Performing Reset will clear all settings made with Setup, such as channel settings. Sub menu list Menu Item Channel surf mode Adjustments/Configurations (alternatives) Sets the mode to select the channel with the Channel up/down button. (All/Favorite/Digital only/Analog only) SetupSUB MENUSet favorite Sets favorite channels. Edit CH caption Changes the station identifier. Signal meter Checks the signal strength if interference or freezing occurs on a digital image. FAQ Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance. For details For additional assistance, please contact us via the website at: White spots orshadow images(noise) Check the position, direction, and connection of the antenna. Interference or frozen digitalchannels (intermittent sound) Change the direction of antenna for digital channels. Check “Signal meter”. If the signal is weak, check the antenna and consult your local dealer. The remote control does not work Are the batteries installed correctly? Are the batteries new? Pictures from external equipment are distortedwhen the unit is connected via HDMI Is the HDMI cable connected properly? Turn Off the TV unit and equipment, then turn them On again. Check an input signal from the equipment. Use equipment compliant with EIA/CEA-861/861B. When the channel is changed onan STB that is connected with HDMI, “HDMI” may be displayedon the top left of the screen This is not a malfunction. Recording does notstart immediately Check the settings of the recorder. For details, read the manual of the recorder. If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV). No sound is produced Sound is unusual Are the speakers’ cables connected correctly? Is “Sound Mute” active? Is the volume set to the minimum? Is “TV speakers” set to “Off”? Change “SAP” settings. Check “HDMI 1 in”, “HDMI 2 in” or “HDMI 3 in” settings. Set “SAP” setting to “Stereo” or “Mono”. Check the HDMI device connected to the unit. Set the audio setting of the HDMI device to “Linear PCM”. If digital sound connection has a problem, select analog sound connection. Problem Actions “VIERA” logo moves onthe screen Screen Some spots remainbright or dark Chaotic image, noisy No image is displayed on screen Only spots are displayedinstead of images Neither image norsound is produced The function to prevent “Image retention” is activated. (Not a faulty symptom)• The screen saver is activated if the TV unit is not operated for a certain time in SD mode.• “Image retention” The Plasma panel is made up of a few million pixels and is produced with advanced technology through an intricate process. Sometimes a few pixels may be bright or dark. These pixels do not indicate a defective panel and will have no impact on the performance of the TV. Check nearby electrical products. (car or motorcycle ignition systems, fluorescent lamp, etc.) Check Picture menu Check the cable connections. Check that the correct input has been selected. Check the channel settings. Check the antenna cables. Is the AC power cord plugged into the outlet? Is the TV unit turned On? Check Picture menu and volume. Check the AV cable connections. Check that the correct input has been selected. Black Box appears Change settings of Closed Caption (CC). Sound TV setParts of the TV set become hot Even when the temperature of parts of the front, top and rear panels has risen, these temperature rises will not pose any problems in terms of performance or quality. Unknown sound heard 1-Sounds from TV cabinet 2- Tick/Click sound3- Buzzing sound 1-Changes in the temperature and humidity of the room may cause the TV’s cabinet to expand or contract and produce metallic sounds. This is not a sign of faulty operation or a malfunction. 2- When the TV is powered on, an electrical component in the TV activates producing a tick/click sound. This is not a sign of faulty operation or a malfunction. 3- Electrical circuits are active while the TV set is on. This is not a sign of faulty operation or a malf...