Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Reset to defaults Resets all picture adjustments to factory default settings except for “Advanced picture”. Picture mode Vivid Provides enhanced picture contrast and sharpness for viewing in a well-lit room. AdvancedPicture settings Adjust the image or picture quality Settings Items Item Description Standard Recommended for normal viewing conditions with subdued room lighting. Cinema For watching movies in a darkened room. It provides a soft, film-like picture. Game For playing video games. Custom (Photo) Customizes each item according to your taste. Photo is displayed in JPEG menu. Back light Adjusts the luminance of the back light. Contrast, Adjusts the color, brightness, etc. for each picture mode to suit your taste Brightness, Color, • Display range Contrast/Brightness/Color/Sharpness : 0 - 100 Tint, Sharpness Tint : -50 - +50 Color temp. Cool/Normal/Warm Selects a choice of Cool (blue), Normal, or Warm (red) color. A.I. picture Off/On Controls dark areas without affecting the black level or brightness in the overall picture. C.A.T.S. Off/On Automatically adjusts the screen brightness according to the ambient lighting condition. Video NR Off/On Reduces noise, commonly called snow. Leave it off when receiving a strong signal. • Some menus are grayed out depending on the input signal or condition. (e.g. “Zoom adjustments” will be grayed out if the aspect is not set to Zoom.) Aspect Screen format JUST/4:3/ZOOM/ Changes the format (aspect ratio). adjustments FULL/H-FILL Lets you choose the aspect depending on the format of received signal. (p. 36) H size Size 1/Size 2 Adjusts the horizontal display range to reduce noise of both side edges of an image. Size 2: Adjusts the image size according to the aspect mode to reduce noise. (p. 36) How Zoom Adjusts vertical alignment and size when aspect setting is “ZOOM”. adjustments PC adjustments Reset to defaults Resets PC adjustments. Sync H & V The H and V sync signals are input from the HD/VD connector. (p. 39) On green Uses a synchronized signal on the Video G signal, which is input from the G connector. (p. 39) Dot clock Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is blurred. H-position Adjusts the horizontal position. V-position Adjusts the vertical position. Clock phase Alleviates the problem if the whole picture appears to flicker or is blurred. First adjust the Dot Clock to get the best possible picture, then adjust the clock Phase so that a clear picture appears..It may not be possible to display a clear picture due to poor input signals. Input resolution Switches to wide display..VGA (640.480 pixels), WVGA (852.480 pixels), XGA (1,024.768 pixels), WXGA (1,280.768 pixels).Options change depending on signals H-frequency V-frequency Displays the H (Horizontal)/V (Vertical) frequencies. Display range Horizontal: 15 - 110 kHz Vertical: 48 - 120 Hz Settings Items Item Description • Some menus are grayed out depending on the input signal or condition. (e.g. “3:2 pulldown” will be grayed out if the input signal is high definition or you are viewing photos, etc.) Advanced 3D Y/C filter Off/On Minimizes noise and cross-color in the picture. picture Color matrix SD/HD Selects image resolution of component-connected devices. SD: Standard Definition HD: High Definition Only used with 480p video signal. MPEG NR Off/On Reduces noise of specific digital signals of DVD, Cable box, etc. Black level Dark/Light Selects Dark or Light. Valid only for external input signals. 3:2 pulldown Off/On/Auto Adjusts the picture recorded in 24 fps for optimum quality. Audio settings Adjust Audio quality Settings Items Item Description Reset to defaults Resets Bass, Treble, and Balance adjustments to factory default settings. Bass Increases or decreases the bass response. Treble Increases or decreases the treble response. Balance Emphasizes the left / right speaker volume. Advanced audio Surround Off/On Enhances audio L/R response when listening to stereo. Volume leveler Minimizes volume disparity after switching to external inputs. TV speakers Off/On Switches to “Off” when using external speakers. Off: “Surround” and “Volume leveler” do not work if “Off” is selected. HDMI in Digital/ Comp./Video The default setting is “Digital” for the HDMI connection. (Digital input signal) Select audio input terminal when DVI cable is connected. (Analog audio input signal) Timer settings The TV can automatically turn On/Off at the designated date and time. If the Timer settings are grayed out, first set the clock (see p. 34) and make sure “Auto power on” is set to “No” (see p. 34) Settings Items Item Description Sleep (Off timer) Sleep (minutes) 0/15/30/60/90 Select how long for the TV to automatically turn off. Timer 1-5 Timer set Enables or disables this timer. (Off/On) (On/Off timer) Inputs Sets the input to select when the TV turns on. Channel Sets the channel to select when the TV turns on. Day Sets the day when the TV turns on. [SUN/MON/TUE/WED/THU/F...