Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
3 Do not use any pedestal other than that provided with this TV. zzOtherwise the TV may fall over and become damaged, and personal injury may result. Do not use the pedestal if it becomes warped or physically damaged. zzIf you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately. During set-up, make sure that all screws are securely tightened. zzIf sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result. Wall Mounting (optional) Use the screws that are threaded into the stand-mounting inserts on the back of your LCD TV to secure it to a Wall Mounting kit. NOTE: Wall Mounting kit is not supplied. It is safe to use long screws for this product. When using long screws, the two bottom screws may come loose,But the top two will remain tight in place, so it will not fall off the wall. Wall Mounting Inserts VESA standard interface 32”200 x 200 mm42”400 x 200 mm Mounting screws measurements: M6 x 4 Please contact your nearest Panasonic dealer to purchase the recommended wall-hanging bracket. For additional details, please refer to the wall-hanging bracket installation manual. Screw for fixing the TV onto the wall-hanging bracket(not supplied with the TV) (View from the side) M6Depth of screw: 32” Minimum: 0.32 ” (8.0 mm) 42” Minimum: 0.39 ” (10.0 mm) 42” Maximum: 0.71 ” (18.0 mm) 32” Maximum: 0.43 ” (11.0 mm) zzCustomer assumes liability if mounting the unit themselves or if a Panasonic bracket is not used. Any damage resulting from not having a professional installer mount your unit will void your warranty. zzAlways be sure to ask a qualified technician to perform any necessary set-up. Incorrect fitting may cause equipment to fall, resulting in injury and product damage. zzDo not mount the unit directly below ceiling lights (such as spotlights, floodlights or halogen lights) which typically give off high heat. Doing so may warp or damage plastic cabinet parts. zzTake care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging the bracket. When using an angled-type wall hanging bracket, please ensure that there is sufficient space for the connecting cables so that they do not press against the wall when the TV is tilted forward. For safety reasons, remove units no longer being used from their wall-mounted locations. Connection Panels 123456Front of the TVHDMI 3 of 42” only Back of the TV7 1. HDMI® IN — The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p, 1080i, and 1080p. 2. AUDIO IN — Shared analog audio connection when using PC or HDMI/ DVI inputs. 3. ANT/CABLE — Input that supports analog (NTSC) and digital (ATSC) off-air antenna signals and analog and digital Cable TV (QAM) signals. 4. PC IN — For use when connecting a personal computer. 5. DIGITAL AUDIO OUT — Coaxial audio output in Dolby Digital or PCM (pulse-code modulation) format for connecting an external Dolby Digital decoder, amplifier, A/V receiver, or home theater system with Coaxial audio input. 6. VIDEO IN / COMPONENT IN — These include standard A/V connections. These are switched by AV input mode. 7. USB Port — To access JPEG or MP3 files. zzYou need to subscribe to a cable TV service to enjoy viewing their programming. zzYou may need to subscribe to a high-definition (HD) cable service to enjoy HD programming. zzThe connection for high-definition can be done with the use of an HDMI or Component Video cable. Note: zzWhen using a Cable box, external equipment and video cables shown in manual are not supplied with the TV. zzFor additional assistance, visit us at: TV controls/indicators Changes the input modeChooses menu and submenu entriesVolume up/downSelects channels in sequencenottub REWOP Menu navigationsFront of the TV rotacidni rewoP )thgil on :ffo ,der :no ( Remote control sensor within about 23 feet (7 meters) in front of the TV set Note: zzThe TV consumes a small amount of electric energy even when turned off. zzDo not place any objects between the TV remote control sensor and remote control. 4 Installing the remote’s batteries Push! OpenClose zzIncorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. zzDo not mix old and new batteries. zzDo not mix different battery types (such as alkaline and manganese batteries). zzDo not use rechargeable (Ni-Cd) batteries. zzDo not burn or break batteries. Remote control 1. POWER - Turns the TV on and off. 2. LAST - Switches to previously viewed channel or input. 3. STILL - Still picture direct function key. 4. CC - Switches the Closed Caption mode On or Off. 5. INPUT - Select mode “ANT/ Cable in”, ”HDMI 1”, ”HDMI 2”, ”Component”, ”Video”, ”PC” by pressing INPUT button of Remot...
Otros modelos de este manual:TV - TCL32C5 (9.24 mb)
TV - TCL32C5X (9.24 mb)
TV - TCL42U5 (9.24 mb)
TV - TCL42U5X (9.24 mb)