Iniciar sesión:
Votos - 3, Puntuación media: 4 ( )

Manual de usuario Panasonic, modelo TCP46S1

Fabricar: Panasonic
Tamaño del archivo: 3.28 mb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:
TV - TCP46S1 (3.21 mb)esca

Resumen del manual


If the CC is set to On on both the receiver and TV when the signal is 480i (except for the HDMI connection), the CC may overlap on the TV. If a digital program is being output in analog format, the CC data will also be output in analog format. If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output monitor. Aspect Ratio (FORMAT) Press the FORMAT button to cycle through the aspect modes. This lets you choose the aspect depending on the format of the received signal and your preference. (p. 20) (e.g.: in case of 4:3 image) FULL JUST FULL JUST Enlarges the 4:3 image horizontally to the screen’s side edges.Stretches to justify the 4:3 image to the four corners of the(Recommended for anamorphic picture) screen. (Recommended for normal TV broadcast) H-FILL 4:3 H-FILL Side bar Enlarges the 4:3 image horizontally to the screen’s side edges. Standard The side edges of the image are cut off. (Note that “Image retention” of the side bar may occur fromdisplaying it for a long time.) ZOOM ZOOM Note FULL, JUST, 4:3 or ZOOM 1080p / 1080i / 720p: 480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9): FULL, H-FILL, JUST, 4:3 or ZOOM Enlarges the 4:3 image to the entire screen. (Recommended for Letter Box) Zoom adjustments Vertical image position and size can be adjusted in “ZOOM”. Select “Zoom adjustments” on the “Picture” menu. (p. 26-27) V-position: Vertical position adjustment V-size: Vertical size adjustment To reset the aspect ratio (OK) Technical Information Ratings FAQs, Technical Information Data format for SD Card browsing Photo: Still images recorded with digital still cameras compatible with JPEG files of DCF* and EXIF** standards Data format: Baseline JPEG (Sub-sampling: 4:4:4, 4:2:2 or 4:2:0) Max. number of files: 9,999 Image resolution: 160 x 120 to 10,000,000 * DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standard ** EXIF (Exchangeable Image File Format) Caution A JPEG image modified with a PC may not be displayed. Partly degraded files might be displayed at a reduced resolution. Note Folder structure viewed in PC DCIM Created automatically 100_PANA 3-digit folder number + 5-digit arbitrary characters 4-digit arbitrary characters + 4-digit file number P1000001.JPG P1000002.JPG Usable characters: 1-byte “a to z”, “A to Z”, “0 to 9,” and “_” P1000003.JPG P1000004.JPG The folder and file names may be different depending on the digital camera used. For the suitable SD Memory Cards, please confirm the latest information on the following website. (This site is in English only) Cautions in handling SD Card: Do not remove the card while the unit is accessing data (this can damage card or unit). Do not touch the terminals on the back of the card. Do not subject the card to high pressure or impact. Insert the card in the correct direction (otherwise, card may be damaged). Electrical interference, static electricity or erroneous operation may damage the data or card. Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.) SD Card warning messages Message Meaning SD card slot is empty. The card is not inserted. No photos The card has no data or this type of data is not supported. Cannot read file The file is broken or unreadable. The TV does not support the format. (Continued) VIERA LinkTM “HDAVI ControlTM” HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 30) This function may not work normally depending on the equipment condition. The equipment can be operated by other remote controls with this function on even if TV is in Standby mode. Image or sound may not be available for the first few seconds when the playback starts. Image or sound may not be available for the first few seconds when Input mode is switched. Volume function will be displayed when adjusting the volume of the equipment. If you connect the same kind of equipment at once (for example: one DIGA to HDMI 1 / another DIGA to HDMI 2), VIERA LinkTM is available for the terminal with the smaller number. If you connect equipment that has “HDAVI Control 2 or later” function to the TV with HDMI cable, the sound from DIGITAL AUDIO OUT terminal can be output as multi channel surround. “HDAVI Control 4” is the newest standard (current as of December, 2008) for the HDAVI Control compatible equipment. This standard is compatible with the conventional HDAVI equipment. HDMI connection HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting the TV unit and the devices. HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player, can be connected to the HDMI connector using an HDMI compliant (fully wired) cable. HDMI is the...

Otros modelos de este manual:
TV - TCP42S1 (3.28 mb)
TV - TCP50S1 (3.28 mb)
TV - TCP54S1 (3.28 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría