Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (p. 9) Otherwise the TV and/or pedestal may fall over and become damaged, and personal injury may result. Location Adjust the plasma panel to your (View from above) .TC-P42ST30 desired angle. a: 12.1 ” (306 mm) b: 15.8 ” (400 mm) c Center of the c: 15° a c rotation. .TC-P46ST30 a: 9.7 ” (244 mm) b: 18.2 ” (460 mm) b c: 10° .TC-P50ST30 a: 10.2 ” (258 mm) b: 18.2 ” (460 mm) c: 10° Note .Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range. .Do not place any objects or hands within the full rotation range. Installing the remote’s batteries Close Incorrect installation may cause Pull open battery leakage and corrosion, resulting in damage to the remote control. • Do not mix old and new batteries. Hook • Do not mix different battery types (such Note the correct as alkaline and manganese batteries). polarity (+ or -). • Do not use rechargeable (Ni-Cd) batteries. Do not burn or break batteries. Caution Power cord connection To attach To remove Insert it firmly until the tabs on both sides click into place. Keep pushing both sides until they snap and pull. Connections Connection Panels LAN connector DIGITAL AUDIO OUT Front of the TV SD card slot (p.26) USB1/2 connector HDMI 3 terminal B C A Back of the TV Antenna or Cable connection Connections Accessories/Accessories Power Cord (Connect after all the other connections have been made.) VHF/UHF Antenna• NTSC (National Television System Committee): ATSC (Advanced Television Systems Committee): Digital TV Standards include digital high-definition television (HDTV), standard-definition television (SDTV), data broadcasting, multichannel surround-sound audio and interactive television. Back of the TV Cable TV VHF/UHF Antenna or * See page 10 (Power cord connection) Cable .You need to subscribe to a cable TV service to enjoy viewing their programming. .You may need to subscribe to a high-definition (HD) cable service to enjoy HD programming. The connection for high-definition can be done with the use of an HDMI or Component Video cable. (p. 12) Note .When using a Cable box, external equipment and video cables shown in this manual are not supplied with the TV. .When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first. .For additional assistance, visit us at: 11 ¦Antenna terminal ¦Pin terminals ¦HDMI terminal greenbluered green .Firmly tighten by hand. .Match colors of plugs and terminals. .Insert firmly. .Insert firmly. Connection references Getting AV cable connection AV cable connection To use HDMI terminals Best Good Basic (Not HD) Conversion cable Connect to Audio input terminal HDMI connection (p. 57) .VIERA Link connection, please refer to p. 33 .The HDMI connection is required for a 1080p signal. HDMI AV OUT HDMI-DVI AV Equipment e.g. Blu-ray Discplayer AV Equipment e.g. Blu-ray Discplayer L R DVI OUT AUDIO OUT To use COMPONENT terminals L R Y PB PR AUDIO OUT COMPONENT VIDEO OUT white red green blue red white red green blue red white red green blue red To use COMPOSITE terminals L R COMPOSITE OUT yellow white red yellow white red yellow white red or e.g. DVD Recorder AV Equipment e.g. VCR AV Equipment e.g. Blu-ray Discplayer Audio connection DIGITAL AUDIO IN Audio equipment Optical cable .For HDMI-ARC (Audio Return Channel) connection, see p. 32 e.g. Amplifier Identifying Controls TV controls/indicators Front of the TV Back of the TV Displays the Main Menu Changes the input mode Chooses Menu and Submenu entries Volume up/down Remote control sensor Within about 23 feet (7 meters) in front of the TV set Selects channels in sequence C.A.T.S. sensor Plasma C.A.T.S. (Contrast Automatic Tracking System) (p. 49) POWER button Power indicator (on: red, off: no light) 3D Eyewear transmitter Getting Note .The TV consumes a small amount of electric energy even when turned off. .Do not place any objects between the TV remote control sensor and remote control. Identifying ControlsConnections Switches TV On or Off (Standby) Displays 3D settings. (p. 25) Lights the buttons for 5 seconds Press again to turn off the button lights Select source to watch (p. 23) Switches to input terminal that has “GAME” label (p. 23) Displays Main Menu (p. 48) Displays Sub Menu for special functions (when available) (p. 20) Colored buttons (used for various functions) Volume up/down Sound Mute On/Off Changes aspect ratio and zoom (p. 20, 55) Switches to previously viewed channel or input External equipment operations Closed caption On/Off (p. 19) Selects Secondary Audio Programming (p. 19) Exits from Menu screen VIERA Link menu (p. 36-37) Displays VIERA Connect (includes VIERA CAST) Home screen (p. 43) Displays VIERA TOOLS menu (p. 22) Selects/OK/Change Go back to previous menu Channel up/down, when viewing from ANT/ Cable source Displays o...
Otros modelos de este manual:TV - TCP42ST30 (2.57 mb)
TV - TCP50ST30 (2.57 mb)
TV - TCP55ST30 (2.57 mb)