Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
If the Cable/DSL modem is far from the TV and/or you have more TVs in the house, you may want to use a wireless network. Connecting to the Internet Wired connection (Directly connected) If you are not using the network for connecting anything else but the TV, you could just connect the TV directly to the Cable/DSL Ethernet connection. Wired connection (Using Router) If you are using the network for connecting various equipments and want to connect the TV, you should use a router to connect the TV to the Internet Wireless connection If you are using the network for connecting various equipments and want to connect the TV, you could also use an optional Wireless LAN Adapter and Access point to connect the TV to the Internet Internet A LAN cable Modem Back of the TV InternetB C (optional accessory) Back of the TV Modem Hub, Router or Access point DLNA Certified media server (for example, PC, etc.) Home network (DLNA feature) Ensure to use a LAN straight cable for this connection. .USB extension cable can be connected to any USB port. .To use only DLNA features, you can operate the features without Broadband network environment. DLNA Certified media server LAN cable Ensure to use a LAN cross cable for this connection. Back of the TV Network settings Network settings This is a setting for connecting to a broadband environment. Select “Network” Select the settings and set Menu Picture Network Audio Timer Lock Setup Network Software update Online Movies settings New software notice Network status Connection test Network connection Wireless network settings IP address/DNS settings Network link Wireless (WiFi) On select adjust Connection test Check that the Network settings are as shown below, and then start “Connection test”. Select “Connection test” and press OK(It takes a while to cancel the test.) Displayed Connection test screen Connection test Check Ethernet cable connection Validate IP address Check for IP address duplication Check connection to the Internet Checking communications with server Test in progress... Complete Connection testSuccess-->Completion screen is displayed. Error-->Follow the directions on screen to complete the setting. If you perform the Proxy settings, check the Proxy addressand the Proxy port number. Network connection Select Network type (Ethernet cable/Wireless (WiFi)) Wireless network settings ¦Sets/Changes wireless network settingsPress “Wireless network settings” and display Wireless networksOr select connection method (below) with color key. Follow the directions on screen to complete the setting WPS Push WPS PIN Manual settings Search again RETURN OK Select your wireless network. Wireless networks Select 0024A5C1C1FE_A-1 11n(5GHz) 11n(5GHz)0024A5C1C1FE_A Wireless type StatusNetwork name (SSID) sssss 11n(5GHz) 001D73C528A0_G 11g(2.4GHz) 001D73D24884 11n(2.4GHz) 001D73D24884-2 11n(2.4GHz) select OK * Wi-Fi Protected Setup is an easy setting of the Wi-FiAlliance’s certification .For more details on setting of an Access point, please refer to operating manual for the Access point. WPS (Push button): You can connect the Access point by pressing this button. WPS (PIN): Set the PIN code that is displayed on the TV on the Access point. Manual settings: Manually set SSID, Security type, and Encryption typeto match the settings of the Access point to which to connect. Search Again: Search again an available wireless network within the range. .When connecting by 11n (5 GHz), select “AES” as the Encryption type for the wireless LAN. Using Advanced IP address/DNS settings Select “IP/DNS setting mode” and set to “Automatic” (When IP/DNS automatic acquisition in DHCP can be used) IP address/DNS settings IP setting mode IP address 192.168.0.5 Subnet mask 255.255.255.0 Default gateway 192.168.0.254 DNS setting mode Automatic DNS 192.168.0.20 Automatic Menu Picture Audio Timer Network The acquired address is displayed. select OK Each IP address is acquired automaticallyIf you are using a broadband router, IP automatic acquisition in DHCP can be used under normal circumstances. If you are not sure, check with the person who installed the equipment, or check the instructions for each device. ¦Manual setting Select “IP/DNS setting mode” and set to “Manual” Select the item and press OK Check the specifications of the broadband router and enter each IP address. Or Enter each IP address as was specified by the provider IP address 0 . 0 . 0 . 0 Proxy setting Set only if specified by the provider. It is not required for normal household use. Select “Proxy setting” Menu Picture Audio Timer k IP address/DNS settings IP setting mode IP address 192.168.0.5 Subnet mask 255.255.255.0 Default gateway 192.168.0.254 DNS setting mode Automatic DNS 192.168.0.20 Proxy setting Automatic Network select OK Select item and press OK select OK Menu Picture Audio Proxy setting Proxy address 0Proxy port Enter address or port number and press OK ¦Proxy addressThis is the address of the relay server that is connected to the ...
Otros modelos de este manual:TV - TC-P42XT50 (2.34 mb)