Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
For more details on setting of Access point, please refer to operating manual for the Access point. .We recommend using 11n (5 GHz) for the wireless system between the built-in wireless LAN and Access point. Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but the communication speed may be slower. .If the wireless system of the Access point is changed, devices that could connect by wireless LAN may no longer be able to connect. .Data transmitted and received over radio waves may be intercepted and monitored. .Keep the TV away from the following devices as much as possible: Wireless LAN, microwaves, and other devices that use 2.4 GHz and 5 GHz signals. Otherwise, the TV failures such as malfunction may occur due to the radio wave interference. .When noises occur due to the static electricity, etc., the TV might stop operating for the protection of the devices. In this case, turn the TV Off with power On / Off switch, then turn it On again. *1 SSID is a name for identifying a particular wireless network for transmission. *2 WPS: Wi-Fi Protected Setup 8 VIERA Touch Pad Controller N2QBYB000015 Accessories/Optional Accessories Accessories Remote Control Transmitter N2QAYB000703 Batteries for the Remote Control Transmitter / Touch Pad Controller (4) AA Battery Accessories Check you have all the items shown. Cable clamper Power cord Component/AV adapter (p. 11) K2KYYYY00199 Quick start guide Owner’s Manual Product Registration Card (U.S.A.) Child safety Pedestal How to assemble (p. 9) Optional Accessories Please contact your nearest Panasonic dealer to purchase the recommended Optional accessories. For additional details, please refer to the Optional accessories installation manual. 3D Eyewear (Rechargeable type) .TY-ER3D4SU .TY-ER3D4MU • Use Panasonic 3D Eyewear supporting Bluetooth wireless technology. • Product information (Model No. and release date etc.) is subject to change without notice. • For more product information (USA) (Canada) (Global reference) Communication Camera .TY-CC20W • This camera can be used with VIERA Connect. • It is recommended to connect the communication camera directly to the TV’s USB2 ports. • For details, read the manual for the Communication Camera. Wall-hanging bracket .TY-WK5P1RW (for 55”) The angle of wall-hanging bracket can be adjusted in “zero tilting (vertical)” and “5, 10, 15 or 20-degree tilting” for this TV. .TY-WK6P1RW (for 65”) The angle of wall-hanging bracket can be adjusted in “zero tilting (vertical)” and “5 or 10-degree tilting” for this TV Rear of the TV Holes for wall-hanging bracket installation Screw for attaching the TV to the wallhanging bracket (not supplied with the TV) Depth of screw: minimum 0.39” (10.0 mm) (55”), 0.67” (17.0 mm) (65”) maximum 0.63” (16.0 mm) (55”), (View from the side) 0.91” (23.0 mm) (65”) a b M8 a: 19.7” (500 mm) (55”) 26.9” (684 mm) (65”) b: 11.8” (300 mm) Warning .In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets. .Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps to prevent the TV from tipping over. .Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage. .Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging the bracket. .When using the angled-type wall-hanging bracket, please ensure that there is sufficient space for the connecting cables not to press against the wall when the TV is tilted forward. .For safety reasons, remove units no longer being used from their wall-mounted locations. 9 Accessories Assembly screws A XYN4+F10FNK (Black) size (M4 x 10) (1) B XYN5+F16FN (silver) size (M5 x 16) (12) Bracket (1) TBL5ZA3200 Neck (1) TXFBL5Z0086 Cover (1) TXFBL5Z0056 . Cover is in the same bag with Owner’s Manual Base (1) TBL5ZX0328 (for 55”) TBL5ZX0381 (for 65”) Attaching the pedestal to TV ¦Assembling the pedestal Insert the protrusion of the Neck into the Base firmly. Neck Protrusion of the Neck (bottom) Front Turn the stand over and fix stand neck securely with assembly screws. (4 screws) • Do not hold the neck when turning over the stand. B x 4 pcs. Front Back of Stand Hole for screw Attach the Bracket to the protrusion of Neck. Make sure that the bracket is anchored before fixing the screws. Fix securely with assembly screws. (4 screws) B x 4 pcs. Bracket Protrusion of Neck (top) Attach the cover and fix securely with assembly screw. A x 1 pcs. Cover ¦Set-up Tighten assembly screws (total 4 screws) loosely at first, then tighten them firmly to fix securely. B x 4 pcs. Arrow mark (Image) Rear side Hole for pedestal installation Bracket Base Work on a flat surface Removing the pedestal from the TV Be sure to remove the pedestal in the following...
Otros modelos de este manual:TV - TC-P65VT50 (1.91 mb)