Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
When using COMPOSITE (VIDEO IN) connection, the Yellow connector (Video) should be inserted into Green connection. Audio connection DIGITAL AUDIO IN e.g. Amplifier Audio equipment Optical cable Identifying Controls TV controls/indicators Changes the input mode Chooses Menu and Submenu entries (Press and hold down for MENU function) Selects channels in sequence Volume up/down POWER button Remote control sensor • An image of the control panel is displayed on the screen while using it. within about 23 feet (7 meters) in front of the TV set Front of the TV Back of the TV C.A.T.S. sensor Plasma C.A.T.S. (Contrast Automatic Tracking System) Power indicator (on: red, off: no light) Note .The TV consumes a small amount of electric energy even when turned off. .Do not place any objects between the TV remote control sensor and remote control. Remote control the CD-ROM.) Switches TV On or Off (Standby) Switches Surround sound setting Select source to watch Displays Options Menu for special functions (when available) Colored buttons (Use for various functions following the instructions on screen.) Volume up/down Sound mute On/Off Changes aspect ratio and zoom Switches to previously viewed channel or input External equipment operations (Refer to the Owner’s Manual on Closed Caption On/Off Selects Secondary Audio Programming Exits from menu screen Sets Sleep timer Displays Main Menu Viewing from media (SD card/USB flash memory) Selects/OK/Change Go back to previous menu Channel up/down, when viewing from ANT/Cable source Displays or removes the information banner Operates the Favorite channel list function Numeric keypad to select any channel or press to enter alphanumeric input in menus Use for digital channels. First Time Setup The first time setup screen is displayed only when the TV is turned on for the first time, after the power cord is inserted into a wall outlet and the “Auto power on” is set to “No”. (Press MENU --> Setup --> Advanced setup --> Auto power on) Turn the TV on with the POWER button (TV) (Remote) or Setup the following items .Select your language .Select your viewing mode (Be sure to select “ Home Use”) If you select “ Store Demonstration” by mistake, confirmation screen will be displayed. To display the “Set viewing mode” screen again and select “Home Use”, do one of the following: • Press and hold down the side POWER button for at least five seconds. • Unplug power cord for 30 seconds and plug in again. .ANT/Cable setup Select and set the settings according to your ANT/Cable environment. Select “Yes” on the confirmation screen, to start the scanning process. After scanning is finished completely, press OK to continue. .Label the inputs for easy identification To name each input, follow the instructions on screen. When this is done, select NEXT and press OK to go to the next step. .Adjust the Clock Select the clock mode and set other settings. Complete First time setup Completion screen is displayed. You can repeat the First time setup • Press MENU --> Setup --> First time setup or To watch TV via a Cable box, Satellite receiver, or any other source (DVD, DVR, gaming device, etc.), press the INPUT button and select the appropriate input. Frequently Asked Questions (FAQ) Why doesn’t the Remote Control work? Check that the batteries are fresh, are of the same type and areinstalled with the correct polarity (+ & -). To operate other devices, such as changing channels when using Cable, or Satellite boxes, or operating non-Panasonic Blu-rayplayers, use the remote supplied with the device. Why is there no picture or just a blue, black or snowy screen being displayed? Check if the power cord is plugged in and the TV is turned on (front red LED light should be on, not blinking). Press the INPUT button on the remote to select the correct input source. Ensure all connections are correct and secure. When using external video source, such as a Cable/Satellite box orDVD player, check that the device is on and functioning correctly. Press MENU on the TV’s remote control. If the menu is displayed, then the TV is working; recheck above steps. Why is the screen blank and the power indicator blinking? The TV has gone into shutdown mode to protect itself. Try unplugging it for a few minutes and connecting it again. If therewas a temporary power surge on the AC line it may now be OK. If the blinking returns, call 1-877-95-VIERA (U.S.A.) or 1-866-3300014 (Canada). Questions Answers Care and Cleaning First, unplug the Power cord plug from the wall outlet. Display panel The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint- free cloth. If the surface is particularly dirty, after cleaning up the dust, soak a soft, lint-free cloth in diluted, mild liquid dish soap (1 part mild liquid dish soap diluted by 100 times the amount of water), and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface of the display panel, then...