Votos - 4, Puntuación media: 4.8
(
)
)
|
Resumen del manual
Power Indicator: Red (standby) Press the button on the remote control to turn the Plasma Display on. Power Indicator: Green Turn the power to the Plasma Display off by pressing the switch on the unit, when the Plasma Display is on or in standby mode. Note: During operation of the power management function, the power indicator turns orange in the power off state. Initial selections Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follow: INPUT1 INPUT2 INPUT3 PC IN Notes: • Selecting is also possible by pressing the INPUT button on the unit. • Input terminal will not be selected if the terminal board is not installed into the SLOT. • Select to match the signals from the source connected to the component/RGB input terminals. (see page 32) • In 2 screen display, the same input mode cannot be selected for the main picture and sub picture. MENU ENTER/INPUT VOL Swing up the door at “PULL”. Selecting the On-Screen Menu Language Press to display the SET UP menu. Press to select OSD LANGUAGE. Press to select your preferred language. Selectable languages 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL POWER SAVE SET UP .......(Japanese) .......(Chinese) Italiano Francais Deutsch English(UK) Espanol ENGLISH(US) .......(Russian)Русский Basic Controls MENU POWER ENTER/INPUT INPUT button (INPUT1, INPUT2, INPUT3 and PC IN selection) (see page 13) Volume Adjustment Volume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move the cursor down (see page 16) Enter / Aspect button This button is locked by initial setting. (see page 16, 18) ON OFF ONSURROUND N button (see page 19, 22, 23, 24) POS. /SIZE button (see page 19) PICTURE button (see page 22) INPUT button (INPUT1, INPUT2, INPUT3 and PC IN selection) Press to select INPUT1, INPUT2, INPUT3 and PC IN input SLOTS sequentially. (see page 13) Sound mute On / Off (see page 24) Numeric buttons (see page 37) ASPECT button Press to adjust the aspect. (see page 18) MULTI Window buttons (see page 20) SURROUND button The surround setting switches on and off each time the SURROUND button is pressed. The benefits of surround sound are enormous. You can be completely enveloped in sound; just as if you were at a concert hall or cinema. Note: The surround settings are memorized separately for each AUDIO MENU (STANDARD, DYNAMIC, CLEAR). MENU Screen ON / OFF This button is locked by initial setting. Each time the MENU button is pressed, the menu screen will switch. (see page 16) Normal Viewing PICTURE SET UP SOUND POS. /SIZE Remote control sensor Power Indicator The Power Indicator will light. • Power-OFF .... Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.) • Standby ......... Red • Power-ON ......Green • DPMS .............Orange (With PC input signal and during operation of PC’s screensaver.) Main Power On / Off Switch Basic Controls OFF TIMER 90 1 2 3 PC NORMAL Standby (ON / OFF) button The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 12). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode. SET UP button (see page 16, 17) DIRECT INPUT buttons Press the INPUT “1”, “2”, “3” or “PC” input mode selection button to select the INPUT mode. This button is used to switch directly to INPUT mode. These buttons can only display the slot which is installed. If you press the button whose slot is not installed, it automatically displays the current input signal. Note: After-image (image lag) may occur on the plasma display panel when a still picture is kept on the panel for an extended period. The function that darkens the screen slightly is activated to prevent after-image (see page 39), this function is not the perfect solution to after-image. Channel Adjustment You can use this button when U/V Tuner Board with MATE I/F is installed (optional accessories). Refer to each Board's Operating Instruction for detail. Volume Adjustment Press the Volume Up “+” or Down “–” button to increase or decrease the sound volume level. OFF TIMER button The Plasma Display can be preset to switch to stand-by after a fixed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed. When three minutes remain, “OFF TIMER 3” will flash. The off timer is cancelled if a power interruption occurs. Digital Zoom (see page 25) Status button Press the “Status” button to display the current system status. Press to access Digital Zoom. This displays an enlargement of the designated part of the displayed image...
Otros modelos de este manual:TV - TH-37PR9U (3.58 mb)
TV - TH-37PG9U (3.58 mb)
TV - TH-42PG9U (3.58 mb)