Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
34) CC Controls equipment connected to HDMI terminals (p. 28) (On/Off) • “Power off link”, “Power on link”, and “Default speakers” cannot be selected if “Off” is set. Sets “Power off link” of HDMI connection equipment (p. 28) (Set/No) Sets “Power on link” of HDMI connection equipment (p. 28) (Set/No) Selects the default speakers (p. 28) (TV/Theater) Turns TV On automatically when the cable box or a connected device is turned On (No/Set) • The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set. (p. 36) Auto power on Change the brightness of the side bar (Bright/Off/Dark/Mid) (4:3 mode only) • The recommended setting is “Bright” to prevent panel “Image retention”. (p. 43) To conserve energy, the TV automatically turns off when NO SIGNAL continues more than 10 minutes. (Set/No) Note • Not in use when setting “Auto power on”, “On/Off Timer”, “Lock” or Digital channel. • “No signal shut-off was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after turning the power off by “No signal shut-off”. • The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. To conserve energy, the TV automatically turns off when no operation of remote or front panel key continues for more than 3 hours. (No/Set) Note • Not in use when setting “Auto power on” or “On/Off Timer”. • “No action shut-off was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after turning the power off by “No action shut off”. • The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. Displays TV version and software license. About Performing Reset will clear all items set with Setup, such as channel settings. (p. 32) Reset On Set Set TV No Bright Set No Adjustments/Configurations (alternatives) Sets the mode to select the channel with Channel up/down button (Favorite/All) Sets favorite channels. (p. 21) Displays Closed Caption. (p. 34) (Off/On) Changes the station identifier. (p. 33) Checks the signal strength if interference or freezing occurs on a digital image. (p. 32) 27 EZ Sync™ “HDAVI Control™” ifi Simultaneously control all Panasonic “HDAVI Control” equipped components using one button on one remote. Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 2” function. Connections to some Panasonic equipment (DVD Recorder DIGA, HD Camcorder, RAM theater, Player theater, Amplifier, etc.) with HDMI cables allow you to interface automatically. The equipment with “HDAVI Control” function enables the following operations: Automatic Input Switching, Power on link, Power off link and Speaker control (p. 29). In addition, the equipment with “HDAVI Control 2” function enables the following operation: EZ Sync Control only with TV’s remote control (for “HDAVI Control 2”) (p. 29). EZ Sync “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed. ■ For the first time / When adding new equipment, reconnecting the equipment or changing the setup. After the connection turn the equipment on and then switch the TV on. Select the input mode to HDMI 1 or HDMI 2 (p. 22), and make sure that an image is displayed correctly. • This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic’s HDMI cable. Recommended part number: RP-CDHG15 (4.9 ft/1.5 m), RP-CDHG30 (9.8 ft/3.0 m), RP-CDHG50 (16.4 ft/5.0 m) Display menu Select “Setup” EZ Sync □ Picture S Audio О Timer ft Setup ф select (D next Select “EZ Sync setting” - select (ok) M (D next ■ Press to exit from menu screen EXIT Select “EZ Sync’ EZ Sync select 28 ■ Press to return to the previous screen RETURN Select “On” (default is On) change If no HDMI equipment is connected or standard HDMI equipment (non- “EZ Sync”) is used, set to “Off”. Menu D Lock Speaker control EZ Sync Control only with TV’s remote control (for “HDAVI Control 2”) Power on link Power off link Default speakers One-touch theater playback At the start of the DIGA, Player theater, or RAM theater playback, the TV’s input automatically switches to the input based on the playback equipment. • For the RAM theater, the speakers automatically switch to the theater system. If using the DIGA operation, the TV’s input automatically switches to the DIGA and DIGA menu is displayed. You can select Home theater, or TV speakers for audio output. Control theater speakers with the TV’s remote control. This function is available o...