Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
After you unplug and plug the power cord in while the unit is in standby mode and also the power is being supplied to a terminal board, the unit will start supplying the power to the board with time delay according to the setting. The power indicator lights up red first and it turns orange when the power starts being supplied to the board. Clock Display Off: Not display the clock. On: Display the clock. The clock is displayed at the lower left of the screen when button is pressed. 10:00 Note: When “PRESENT TIME SETUP” is not set, the clock is not displayed even if “Clock Display” is “On” (see page 29) All Aspect Sets All Aspect mode (advanced aspect setting) or default aspect mode. With each press of button, the aspect changes in the selected mode. Off: Default aspect mode On: All Aspect mode Aspect mode of each setting is as follows: (Example: HD signal) Off 4:3>H-FILL>ZOOM>FULL>JUST On 4:3 (1)>4:3 (2)>4:3 Full>Zoom1>Zoom2>Zoom3>16:9>14:9>Just1>Just2 Serial Slot Select Rotate Off: Does not rotate the image. On: Rotates the image 180 degrees. Slot1 Slot2 Slot3 Selects the slot which communicates serial. Note: The setting of an external command can be set only from the fixed serial terminal. (see page 11) Normalization When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote ID” adjustments, set all the values “Off” so that all the buttons are enabled again. Press the button on main unit together with button on the remote control and hold for more than 5 seconds. The “SHIPPING” menu is displayed and the lock is released when it disappears. Options Adjustments Weekly Command Timer You can set 7-day timer programming by setting time and command. Note: Before setting Weekly Command Timer, set PRESENT TIME SETUP. (see page 29) 1 1 Press to select Function. Press to select “On”. Note: • When Function is set to On, SET UP TIMER (see page 29) is unavailable and INTERVAL / TIME OF DAY in MODE of SCREENSAVER (see page 30) cannot be selected. 2 2 Press to select a day. Press to select a program number. Note: • You can set the program from 1 to 7. --- indicates unset. 3 3 Press to select Program Edit. Press to show the Program Edit screen. 4 4 Press to select Program. Press to change the program numbers (1-7). Press to select a command number. Press to show the previous / next command pages (1-8) of the selected program. Press to show the command setting screen. Options 1/3 Weekly Command Timer Onscreen display On Press ACTION ( ) button Weekly Command Timer Program1Monday OnFunction Program3Tuesday ---Wednesday Program3Thursday ---Friday Program6Saturday Program4Sunday Program Edit Program number y Thursday Program3 Friday --- Saturday Program6 Sunday Program4 Program Edit Program Edit screen Weekly Command Timer 8:00 10:30 01 02 1/8 --:--03 --:--04 --:-- --:-- 05 12:0006 9:12 PON IMS:SL1 --- --- --- --- DAM:ZOOM AVL:10 07 08 1Program Weekly Command Timer 8:00 10:3002 01 1/8 --:--03 --:--04 --:-- --:-- 05 12:0006 9:12 PON IMS:SL1 --- --- --- --- DAM:ZOOM AVL:10 07 08 1Program Weekly Command Timer 20:00 20:30 57 58 8/8 22:0059 --:--60 --:-- --:-- 61 --:--62 --:-- AVL:00 DAM:NORM POF --- --- --- --- ---63 64 1Program Command (--- indicates unset) Set time of timer (--:-- indicates unset) Command numbers Options Adjustments 6 6 Press to select Command No. Command setting screen Press to select a command number. Weekly Command Timer 02Command No 10:30Time IMS:SL1Command 1Program 7 7 Press to select Time / Command. Press to set each item. Time: Set the time to execute a command program. Pressing “ ” or “ ” button once changes “Time” 1 minute. Pressing “ Weekly Command Timer Command 02Command No IMS:SL1 10:30Time 1Program ” or “ ” button continuously changes “Time” by 15 minutes. Command:Select a command to execute at the set time. This unit has 64 commands to set. (see page 53) Notes: • Command is performed in order of execution time, regardless of the command number. • If a command execution time overlaps with that of other commands, these commands are performed in number order. • Pressing , Time becomes --:-- and Command becomes ---. Note: Press to return to the previous screen. Shipping condition This function allows you to reset the unit to the factory setting. 1 2 2 Press to display the SET UP menu. Press to select “OSD LANGUAGE”. 3 3 Press and hold till the SHIPPING menu is displayed. 1/2 SIGNAL PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SAVE SET UP SCREENSAVER Press to select “YES”. YES SHIPPING Press to confirm. [from the unit] 1 Press the MENU button till the SET UP menu is displayed. 2 Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”. 3 Press and hold the ENTER button till the SHIPPING menu is displayed. 4 Press the Volume Up “+” or Down “–” button to select “YES”. 5 Press the ENTER button and wait for 10 sec. Note: Press the R button to retur...
Otros modelos de este manual:TV - TH-42PF11UK (4.98 mb)
TV - TH-50PF11UK (4.98 mb)
TV - TH-58PF11UK (4.98 mb)