Votos - , Puntuación media:
(
)
)
Fabricar: Panasonic
Tamaño del archivo: 318.07 kb
Nombre del archivo: TZPCD3000.PDF
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
Reposition or relocate the receiving antenna for the radio or television that is “receiving” the interference. Change the position of the Digital CATV Terminal with respect to the radio or television equipment that is receiving interference. This product incorporates copyright protection technology thatb is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise autthorized by Macrovision. Reverse engineering or disassembly is prohibited. U.S. Patents Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; 6,381,747; and 6,516,132 Trademark acknowledgements Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. "TVPASS CARD" is a trademark of MOTOROLA CORPORATION. All other trademarks are the property of the various trademark owners. Dear Welcome to hope that Terminal. To obtain maximum them for future For assistance, please Front and Rear View of the Digital Terminal Front Panel 12 6 789 1 POWER indicator(LED) 2 MENU Button 3 Remote control signal presentindicator(LED) 34 5 1011 12 Lights when the unit is on. Display the Main menu. Flashes when an error-free signal is received from the remote contorol. Normally displays current channel number or time of day; in the diagnostic mode,displays diagnostic code. Changes channel up or down. Turn TZ-PCD3000 on/off. Closes menus and show the previous screen. Moves the cursor in menus and electronic program guide screens. Selects menu options, purchases for Pay-Per-View (PPV) events and tunes channels from the electronic program guide. Lights when a message is present. Receives signal from the remote control emitter lens window. Use to connect a peripheral equipment to the Digital CATV Terminal. 4 5 6 7 8 9 10 11 12 Display Channel Button POWER Button EXIT Button Button SELECT Button MESSAGE indicator(LED) Remote control unit photoreceptor USB Port (Universal Serial Bus) Rear Panel 12 1 CABLE IN 2 CABLE OUT DIGITAL AUDIO 3 COAX OUT USB Port4 (Universal SerialBus) 34 5 106 7 8 12 USB SERIAL COAX OUT IR BLASTER CABLE IN VIDEO VIDEOR-AUDIO-L OUT2 OUT1 S-VIDEO SWITCHED AC OUT 120V~60Hz 5A AC IN 120V~60Hz CABLE OUT R-AUDIO-L OPT OUT 9 11 Use to connect Cable Signal input from Cable Service Provider. Use to connect the Digital CATV Terminal output to your TV or VCR. The COAXIAL S/PDIF connector is a digital output connection that carries Dolby Digital (up to 5.1ch) audio or PCM audio. Use to connect a peripheral equipment to the Digital CATV Terminal. 5 6 7 8 9 10 11 12 AC Switched Outlet AUDIO OUT Note: VIDEO OUT S-VIDEO OUT DIGITAL AUDIO OPT OUT IR BLASTER SERIAL port AC Power Input Use to connect the other component such TV. (120 V AC, 60 Hz, 5 A) Please use within specification. Use to connect the Digital CATV Terminal audio output to your TV with stereo sound, or VCR with stereo sound. AUDIO OUT1 is for TV, and the volume is variable. AUDIO OUT2 is for VCR, and the volume is fixed. Use to connect the Digital CATV Terminal video output to your TV or VCR. Use to connect the Digital CATV Terminal S- video output to your TV with S-VIDEO, or VCR with S-VIDEO. The OPTICAL S/PDIF connector is an optical digital output connection that carries Dolby Digital (up to 5.1ch) audio or PCM audio. When an IR BLASTER cable unit is connected to this terminal, this terminal can output remote control signals for recording images from a video deck that is connected to the Digital CATV Terminal This terminal can be used to send and receive data between the Digital CATV Terminal and other equipment. (do not connect your PC to this SERIAL port. ) Use to connect the Digital CATV Terminal to an AC electrical outlet with AC cord (included) . Digital Terminal Follow this diagram Terminal to a stereo RLAUDIOINPUTVIDEOS-VIDEO Procedure 1 Connect S-VIDEO Cable from the S-VIDEO output jack on the Digital CATV Terminal to the S-VIDEO input jack on the TV or VCR. Note: Connect either the S-VIDEO or video input/output as shown above. S-VIDEO will provide better picture quallity. 2 Connect audio cables from the left and right audio output jacks on the Digital CATV Terminal to the left and right audio input jacks on the TV or VCR. Note: Additional equipment and cables shown are not supplied with this set. Digital Terminal Follow this diagram Terminal to a TV USB SERIAL COAX OUT IR BLASTER CABLE IN VIDEO VIDEOR-AUDIO-L OUT2 OUT1 S-VIDEO SWITCHED AC OUT 120V~60Hz 5A AC IN 120V~60Hz CABLE OUT R-AUDIO-L OPT OUT Procedure Connect the CABLE OUT jack of the Digital CATV Terminal to the ANT IN jack of the VCR, and connect the ANT OUT jack of the VCR to the ANT IN jack of the TV using 75 shielded cable. Note: Additional equipment and cables shown are not supplied with this set. Troubleshooting Symptom Remedy No power Check that the AC power plug is securely No reception Check t...