Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
If your VCR does not have Smartlink a message will be displayed reminding you to set your VCR timer. Press the RED button to display the ‘Manual Timer Record’ menu. OK 2. Press the V or v buttons to select the correct date. Press the b button to highlight the start time. 3. Press the V or v buttons to select the start time. Press the b button to highlight the stop time. 4. Press the V or v buttons to select the stop time. Press the b button to highlight the programme. 5. Press the V or v buttons to select the programme. Press the OK button to store. The Timer List menu is displayed. The event is now set to the Timer List. Press the YELLOW button to delete the timed event or press the BLUE button to return to the main EPG screen. 6. Press the RED button and repeat steps 2 to 5 if you wish to store further programmes for recording. 7. Press the button to return to normal TV operation. 8. Set the timer recording function on your VCR to switch on and off to correspond with the programmes you have stored for recording. Note: Once a programme has started recording, do not switch channels or the recording will be cancelled. To cancel a previously set event 1. With the EPG menu on screen, press the BLUE button to display the Timer List. 2. Press the V, v, B or b buttons to highlight the programme/event you wish to cancel. 3. Press the YELLOW button to cancel the programme/event. Basic Operation 15 DX40 Pages 11-20.fm Page 16 Wednesday, August 22, 2001 12:07 PM Basic Operation The Digital INFO display This menu gives you information on the programmes currently being shown aswell as the those programmes which are on next. 1. With the TV in Digital mode, press the button on the remote control to display the ‘Digital INFO display’ screen. 1 2 3 654 7 8 9 0 OK 2. Press the b button to obtain a brief description of the next programme in the schedule. If the programme box is blank, there is no information currently available. To return to the starting point, press the B button repeatedly until the description for the current programme reappears. 3. Press the button on the remote control at any time to exit the ‘Digital INFO display’. Note: To change channels while the ‘Digital INFO display’ is on screen, press the relevant numbered buttons on the remote control. Using other INFO menu features Subtitles This feature will place Digital subtitles on the screen (similar to selecting p.888 in analogue Teletext mode). With the ‘Digital INFO display’ on the TV screen, press the RED button to access the ‘Subtitles’ pop-up menu. Press the V or v button to highlight the language required then press OK to select. To remove subtitles from the TV screen, access the ‘Subtitles’ pop-up menu and select ‘Off’. Audio This feature allows you to listen to the broadcast in different languages*. With the ‘Digital INFO display’ on the TV screen, press the GREEN button to access the ‘Audio’ pop-up menu. Press the V or v button to highlight the language required then press OK to select. Note: *Only when the programme is broadcast in multiple languages. REC/Timer If you highlight a current programme, the REC feature allows you to automatically set your VCR to record the selected programme**. With the ‘Digital INFO display’ on the TV screen, press the YELLOW button to access the ‘REC’ pop-up menu. If your VCR does not have Smartlink a message is displayed reminding you to manually set your VCR. Press the RED button to continue or press the BLUE button to return to the INFO display. If you highlight a future programme, the Timer feature allows you to automatically set your VCR to record the selected programme, or have the TV switch to the correct channel automatically when the selected programme starts. Press the RED button and your VCR will automatically record the selected programme when it starts (only if your VCR has Smartlink facility), or press the GREEN button if you wish the programme to appear on your TV screen when transmission begins. Notes: **Only for Smartlink VCRs Do not switch off theTV once a programme has been set to record. If you do not wish to view the programme being recorded, press the TV button on the remote control to switch the TV into standby mode. When a programme has been set to record and the TV is in standby mode the standby indicator on the front of the TV will flash green periodically to inform you that a programme has been set to record. Do not change channels or switch the TV to analogue mode once a programme has started recording or the recording will be cancelled. / Set-up With the ‘Digital INFO display’ on the TV screen, press the BLUE button to access the ‘Main Menu’. The ‘Main Menu’ is explained on the following pages. 16 Basic Operation DX40 Pages 11-20.fm Page 17 Wednesday, August 22, 2001 12:07 PM Advanced Operation The Main Menu The ‘Main Menu’ contains several features that will allow you to customise the Digital side of your TV. The ‘Main Menu’ is only available when watching Digital channels. If the TV i...
Otros modelos de este manual:TV - KD-32DX40U (16.7 mb)
El receptor y el amplificador - Trinitron KD-32DX40U (16.7 mb)