Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
Because of the earth’s magnetism, the picture might slant. The Picture Rotation menu allows you to correct the picture slants if it is necessary. a) If it is not necessary, press t. b) If it is necessary, press 2 +/– to correct any slant of the picture. Finally press t to store. Picture Rotation [–2] [2+] Select [–2+] Confirm [t] End [MENU] GB • To allow this menu to appear again, press and hold MENU button at top control panel for about 5 seconds. • The MENU, and / / / buttons on the remote control can also be used for the operations above. Your TV is now ready for use. First Time Operation 9 Introducing and Using the Menu System Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: 1 Press MENU to switch the menu on. 2 • To highlight the desired menu or option, press or . • To enter to the selected menu or option, press . • To return to the last menu or option, press . • To alter settings of your selected option, press / / or . • To confirm and store your selection, press . 3 Press MENU to remove the menu from the screen. Picture Select Confirm End Picture Intelligent Picture: On Picture Adjustment Mode: Live Picture Mode: Live Picture Adjustment Intelligent Picture: On Select Confirm End The “Picture” menu allows you to alter the picture adjustments. To do this: After selecting the item you want to alter, press , then press / / or repeatedly to adjust it and finally press to store the new adjustment. This menu also allows you to customize the picture mode based on the programme you are watching: Mode Live (for enhanced picture contrast and sharpness). Movie (for a finely detailed picture). Game (for a picture from game). Personal (for your own custom settings). Picture Adjustment Contrast Press Press oror to reduce picture contrast. to enhance picture contrast. Brightness PressPress or or to darken the picture. to brighten the picture. Colour PressPress or or to decrease colour intensity. to increase colour intensity. Menu System Hue Press or to decrease the green tones. Press or to increase the green tones. Hue can only be adjusted for NTSC colour signal (e.g. USA video tapes). Intelligent Picture Sharpness Reset On/Off Press or to soften the picture. Press or to sharpen the picture. Select to reset the picture to the factory preset levels. Select to optimize the picture quality. E.g. reduce noise level when signal is weak. If any changes are made to “Picture Adjustment”, “Mode” will switch automatically to “Personal” and the new setting will be stored as “Personal”. Sound Sound Auto Volume: Off Select Confirm End Sound Auto Volume: Off Select Confirm End The “Sound” menu allows you to alter the sound adjustments. GB Auto Volume On/Off Volume level of the channels will stay the same, independent of the broadcast signal (e.g. in the case of advertisements). Menu System 11 Timer The “Timer” menu allows you to alter the timer adjustments. Timer On Timer: Sleep Timer: Off Off Select Confirm End Timer On Timer: Sleep Timer: Off Off Select Confirm End Sleep Timer The “Sleep Timer” option in the “Timer” menu allows you to select a time period for the TV to switch itself automatically into the standby mode. To do this: After selecting the option, press , then press or to set the time period delay (max. of 1 hour and 30 minutes) and finally press to store. • While watching the TV, you can press the button on the remote control to display the time remaining. • One minute before the TV switches itself into standby mode, “TV will turn off soon” is displayed on the TV screen automatically. On Timer The “On Timer” option in the “Timer” menu allows you to select a time period for the TV to switch itself automatically on from standby mode. To do this: After selecting the option, press , then press or to set the time period delay (max. of 12 hours) and finally press to store. Finally press the standby button &/1 on the remote control. After the selected length of time, the TV switches on automatically and “On Timer” will appear on the screen. • The standby indicator 1 on the TV set lights up in amber to indicate that “On Timer” is active. • Any loss of power will cause these settings to be cleared. • If no buttons are pressed for more than one hour after the TV is turned on using the “On Timer”, the TV automatically goes into standby mode. Menu System Channel Set Up The “Channel Set Up” menu allows you to preset channels on this TV. Select End Channel Set Up Programme Labels Manual Programme Preset Programme Sorting Auto Tuning Confirm Select End Channel Set Up Programme Labels Manual Programme Preset Programme Sorting Auto Tuning Confirm Auto Tuning The “Auto Tuning” option in the “Channel Set Up” menu allows you to automatically search and store all available TV channels. To do this: After selecting the option, press and then proceed in the same way as in the step 3 of the section “Switching On the TV and Automatically Tun...
Otros modelos de este manual:TV - KV-21CT1U (3.83 mb)