Votos - 3, Puntuación media: 4
(
)
)
|
Fotos y especificaciones Sony KE-P37XS1 |
Otros manuales para este modelo:
Resumen del manual
Do not remove ferrite cores. Do not remove ferrite cores. GB Do not remove ferrite cores. For more details regarding VCR connection, refer to “Connecting Optional Equipment to the TV” on page 38 of the instruction manual. Connecting an aerial Connecting a VCR with an aerial Do not connect to the mains before all connections are complete. Do not connect to the mains before all connections are complete. OUT IN or After setting up, secure the TV set to a wall, pillar, etc, using the supplied anchor attachments, for a safety purposes. 1 Remove the two screws attached to the upper rear side of te TV set. 2 Replace the two screws with the two supplied anchor attachments. 3 Secure a wall anchor bracket (not supplied) to a solid wall or a pillar. 4 Pass a strong cord or chain trough both holes of the anchor attachments and then secure to a wall or pillar, etc. Connecting the AC Cable, Aerial and VCR Checking the Accessories Supplied KE-P37XS1 KE-P42XS1 4Stabilizing the TV set1 GB 3 Inserting Batteries into the Remote Control 2 Thank you for purchasing this Sonyproduct. After following this step by step guideyou will be able to: Insert Batteries into the Remote Control. Connect the AC Cable, Aerial and VCR to your TV. Stabilize the TV set. Select the language of the menu screens. Select the country in which you wishto operate the set. Tune your TV. Change the broadcast channels intoa different order. View TV Programmes. Make sure you insert the supplied batteries using the correct polarities. Always remember to dispose of used batteries in an environmentally friendly way. • Use the supplied mains lead (Type C-4, Type BF or Type C-5, see step 1). • Use the supplied coaxial cable for aerial connection. • The Scart lead is optional, however if you use a Scart lead to connect your VCR it can improve picture and sound quality when using it. • For more details of VCR connection, please refer to the section “Connecting Optional Equipment” on page 38 of the instruction manual. If you do not have a Scart lead, after automatically tuning the TV, tune in the VCR test signal to the TV programme number “0” by using the “Manual Programme Preset” option. (for details of how to manually programme these presets, see page 28, step A of the instruction manual). Refer to your VCR instruction manual to find out how to find the output channel of your VCR. 1 Remote control (RM-Y1010): 2 Batteries (AA size): 1 Coaxial Cable: 2 Anchor attachments: 1 Cleaning Cloth: 1 AV Mouse: 1 Main Lead (Type C-4): Use these mains leads (with safety earth) if you use the set outside the United Kingdom and Ireland. 1 Clump Belt: 1 “Notes on Plasma” book. 1 Main Lead (Type BF): • Use these mains leads (with safety earth) if you use the set in the United Kingdom. • See “NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM and IRELAND” on page 2 of the instruction manual when using these mains leads. • These mains leads may not be supplied depending on the country. 1 Main Lead (Type C-5): • Use these mains leads (with safety earth) if you use the set in the Swiss Confederation. • These mains leads may not be supplied depending on the country. Do not remove ferrite cores. Do not remove ferrite cores. GB Do not remove ferrite cores. For more details regarding VCR connection, refer to “Connecting Optional Equipment to the TV” on page 38 of the instruction manual. Connecting an aerial Connecting a VCR with an aerial Do not connect to the mains before all connections are complete. Do not connect to the mains before all connections are complete. OUT IN or After setting up, secure the TV set to a wall, pillar, etc, using the supplied anchor attachments, for a safety purposes. 1 Remove the two screws attached to the upper rear side of te TV set. 2 Replace the two screws with the two supplied anchor attachments. 3 Secure a wall anchor bracket (not supplied) to a solid wall or a pillar. 4 Pass a strong cord or chain trough both holes of the anchor attachments and then secure to a wall or pillar, etc. Connecting the AC Cable, Aerial and VCR Checking the Accessories Supplied KE-P37XS1 KE-P42XS1 4Stabilizing the TV set1 GB 3 Inserting Batteries into the Remote Control 2 Automatically Tune the TV You need to tune the TV to receive channels (TV Broadcast). By following the instructions below, this set automatically searches and stores all available channels for you.65 Selecting the language of the menu screens and the country This TV set works with menu screens. By following the instructions below, you can select the desired language of the menu screens and the country in which you wish to operate the TV. Switching on the set 7 Changing the Programme Order of the broadcast channels By following the instrutions below, you can rearrange the order in which the broadcast channels appear on the screen. 8 1 Connect the TV plug to the mains socket (220-240V AC, 50Hz). 2 The first time that the TV set is connected, it is usually turned on. If the TV is off, press the on/off button on the TV ...
Otros modelos de este manual:TV - KE-P42XS1 (207.9 kb)