Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
To keep your setting, select “Off”. 4:3 Default Selects the default screen format for use with 4:3 broadcasts. Smart Displays conventional 4:3 broadcasts with an imitation wide screen effect. 4:3 Displays conventional 4:3 broadcasts in the correct proportions. Off Keeps the current “Screen Format” setting when the channel or input is changed. Display Area Adjusts the picture display area in 1080i/p and 720p sources when “Screen Format” is set to “Wide”. Full Pixel Displays pictures in their original size if the input source is 1080i/p. Normal Displays pictures in their recommended size. -1/-2 Enlarges the picture to hide the edges of the picture. Horizontal Shift Adjusts the horizontal position of the picture. Vertical Shift Adjusts the vertical position of the picture when “Screen Format” is set to “Zoom”. Vertical Size Adjusts the vertical size of the picture when “Screen Format” is set to “Smart” or “Zoom”. hdmi Set-up This is used to set the “Control for HDMI” compatible equipment connected to the HDMI sockets. Note that the interlock setting must also be made on the connected “Control for HDMI” compatible equipment side. Control for HDMI This sets whether to interlock the “Control for HDMI” compatible equipment and the unit. When set to “On”, the following menu items can be performed. However, power consumption in standby mode is higher than usual. Auto Devices Off When this is set to “On”, the “Control for HDMI” compatible equipment turns off when you switch the unit to standby mode using the remote. Auto TV On When this is set to “On” and if the connected HDMI, control compatible equipment is turned on, the unit automatically turns on, and the displays the HDMI input from the connected equipment. Device List Update Creates or updates the “HDMI Device List”. Up to 14 “Control for HDMI” compatible equipment can be connected, and up to four equipment can be connected to a single socket. Be sure to update the “HDMI Device List” when you change the “Control for HDMI” compatible equipment connections or settings. Select them manually one by one until getting a correct picture for several seconds. HDMI Device List Displays the connected “Control for HDMI” compatible equipment. 42 GB Monitor Set-up Power Saving Light Sensor Reduces the power consumption by adjusting the backlight brightness. This also enhances the black level. Select from “Off’, “Low”, “High” and “Picture Off’. On Automatically optimises the picture settings according to the ambient light in the room. Turns off the “Light Sensor” feature. Off • Be sure not to put anything over the sensor, as its function may be affected. See page 18 for the location of the light sensor. • Depending on the “Picture Mode” and “Power Saving” settings, the effect of “Light Sensor” may vary. Product Information Displays your monitor’s product information. Remote Control Set- Registers a remote to the unit, otherwise the remote cannot be used with the unit. up Instruction screens appear if you register or delete a remote. Follow the instructions to register or delete. • The remote can only be registered to only one unit. Wireless Channel Set-up Language Wireless Channel Selection Selects a wireless channel from “Auto”, “36ch”, “40ch”, “44ch” or “48ch”. If the wireless channel is uncertain, select “Auto” to search an available channel. Wireless Displays information about the current wireless channel and Information link level. Selects the language in which the menus are displayed. Logo Illumination Lights up and turns off the Sony logo on the front of the monitor. PC Settings Screen Format Selects a screen format for displaying input from your PC. Normal Displays the picture in its original size. Full 1 Enlarges the picture to fill the vertical display area, keeping its original horizontal-to-vertical aspect ratio. Full 2 Enlarges the picture to fill the display area. Reset Resets the PC screen settings to the factory settings. Horizontal Shift Adjusts the horizontal position of the picture. Vertical Shift Adjusts the vertical position of the picture. 43 GB Using MENU Functions Additional Information Installing the Accessories (Wall-Mount Bracket) To Customers: For product protection and safety reasons, Sony strongly recommends that installing of your monitor be performed by Sony dealers or licenced contractors. Do not attempt to install it yourself. To Sony Dealers and Contractors: Provide full attention to safety during the installation, periodic maintenance and examination of this product. Your monitor can be installed using the Wall-Mount Bracket SU-WL500/SU-WL700 (sold separately). For SU-WL500, install as illustrated below. For SU-WL700, see the manual supplied with SU-WL700. • Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation. • Refer to “Detaching the Table-Top Stand from the Monitor” (page 11). • Refer to “Monitor install...
Otros modelos de este manual:TV - KDL-46EX1 (3.94 mb)
TV - KDL-52EX1 (3.94 mb)