Votos - 3, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Generally, installation guide uses this function. - Limit Position (East / West): Selects the direction of the positioner Limit. - Antenna Position: Adjusts and stores the antenna position for the selected satellite. ► English - Store Current Position: Stores the current position as the selected positioner Limit. - Go to Zero: Moves the antenna to the reference position. - Reset Positioner Limit: Allows the antenna to rotate over the full arc. • Reset All Setting (OK / Cancel): All satellite settings will be reset to the initial values. < ► English ■ Edit Channel Number (Disable / Enable) (depending on the country) Use this to change channel number. When channel number is changed, channel information is not updated automatically. < ► English ■ Fine Tune (analogue channels only) If the signal is weak or distorted, fine tune the channel manually. N Fine tuned channels are marked with an asterisk “*”. N To reset the fine-tuning, select Reset. ► English ■ Transfer Channel List (depending on the country) Imports or exports the channel map. You should connect a USB storage to use this function. N The PIN number input screen appears. Enter your 4 digit PIN number. • Import from USB: Import channel list from USB. • Export to USB: Export channel list to USB. < ► English □ Changing the Preset Picture Mode O MENUm ^ Picture ^ Picture Mode ^ ENTERS ■ Picture Mode Select your preferred picture type. N When connecting a PC, you can only make changes to the Entertain and Standard. • Dynamic: Suitable for a bright room. • Standard: Suitable for a normal environment. • Natural for lcd 550 series and above : Suitable for reducing eye strain. • Movie: Suitable for watching movies in a dark room. • Entertain: Suitable for watching movies and games. N It is only available when connecting a PC. ► English for LCD 450 (19”, 22”) Model □ Adjusting Picture Settings ■ Samsung MagicAngle O MENUm ^ Picture ^ Samsung MagicAngle ^ ENTERS Adjust screen viewing Angle to optimize screen quality according to your viewing position. • Samsung MagicAngle: When viewing the screen at an angle from below or bove by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front. 4 Off: Select when viewing from the front position. ► Lean Back Mode: Select when viewing from a slightly lower position. Standing Mode: Select when viewing from the upper position. • Mode: Adjust screen viewing angle. N When Samsung MagicAngle is set to Lean Back Mode or Standing Mode, Gamma is not available. English ■ Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R) Your television has several setting options for picture quality control. O MENUm —— Picture —— Backlight —— ENTERS 4 N NOTE • In analogue TV, Ext., AV modes of the PAL system, the Tint (G/R) function is not available. • When connecting a PC, you can only make changes to Backlight, Contrast, Brightness and Sharpness. • Settings can be adjusted and stored for each external device connected ► to the TV. English ■ Screen Adjustment Set the various picture options such as picture size and aspect ratio. • Picture Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time. Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio. 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnifies the picture size more than 4:3. 4 N Adjusts the Position by using ▲ , ▼ buttons. ► Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. N Adjusts the Zoom or Position by using ▲ , ▼ button. English 4 4:3: Sets the picture to basic (4:3) mode. N Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention (screen burn) which are not covered by the warranty. Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted. Smart Viewl for lcd 550 series and above : Reduces original screen by 50%. Smart View2 for lcd 550 series and above : Reduces original screen by 25%. N note Smart Viewl is enabled only in HDMI mode. Smart View2 is enabled only in DTV and HDMI modes. The picture size can vary depending on the input resolution when content is played using Videos under My Downloads. ► English < • Position: Adjust the picture position. It is only available in Screen Fit or Wide Zoom. • Zoom/Position: Adjust the picture position. It is only available in Zoom. N NOTE • After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode, you may need to centre the picture: 1. Press the u or ▼ button to select Position. 2. Press the ENTERS button. 3. Press the u, ▼ , 1 or ► button to move the picture. • Depending on the input source, the picture size opti...
Otros modelos de este manual:TV - LA32D450G1W (6.3 mb)
TV - LA32D550K7W (6.3 mb)
TV - LA40D550K7W (6.3 mb)
TV - LA46D550K7W (6.3 mb)