Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
. . . Ensure the TV is turned off before you connect the Samsung Wireless LAN Adapter. . . Connection Methods: You can setup the wireless network connection like below. – – Auto Setup (Using the Auto Network Search function) – – Manual Setup – – WPS(PBC) – – Wi-Fi Direct . . The Samsung Wireless LAN Adapter may not be recognized when using a connection via a USB hub or via a USB extension cable other than the cable supplied. Notice The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter. In such a case, establish a connection using one of the following methods or connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference. Method 1 Connect using the USB right angle adapter. To connect the Samsung Wireless LAN Adapter using the USB right angle adapter, follow these steps: 1. Connect the USB right angle adapter to the Samsung Wireless LAN Adapter. 2. Connect the other end of the right angle adapter to the USB port. * The position of port may differ depending on the model. Method 2 Connect via an extension cable To reconnect the Samsung Wireless LAN Adapter using the extension cable, follow these steps: 1. Connect the extension cable to the USB port. 2. Connect the extension cable and Samsung Wireless LAN Adapter. 3. Attach the Samsung Wireless LAN Adapter to the back of the TV near the top, using doublesided adhesive tape. N N The Samsung Wireless LAN Adapter should be installed in an interference-free area in order to avoid interference between the adapter and tuner. or * The position of port may differ depending on the model. ¦ ¦ Network Settings O O MENUm > Network > Network Settings > ENTERE You can set the wired or wireless network connection. N N For detailed settings for wired network, refer to the "Setting the Wired Network", and for detailed settings for wireless network, refer to the "Setting the Wireless Network" in this manual. ¦ ¦ Network Status O O MENUm > Network > Network Status > ENTERE You can check the current network and Internet status. . . Setting the Wired Network for LED 5 series 32" and above, PDP 490 series N N For LED TVs, network function is not supported depending on the country. ¦ ¦ Wired Network Setup (Auto) N N When connecting the LAN Cable, the screen pop-up appears directly to set wired network. Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps: How to set up automatically 1. Go to Network Settings screen. 2. Select Start. 3. The network connection screen appears, and network setting is done. Network Settings Network cable connected. Press Start to configure your wired network settings. If you want to connect to your wireless network, plug in a Samsung Wireless LAN Adapter. Start Cancel N N If it fails to set automatically, check the connection of LAN port. N N If you cannot fi...
Otros modelos de este manual:TV - LA32E420E2W (2.08 mb)
TV - UA22ES5000W (2.08 mb)
TV - UA26EH4000W (2.08 mb)
TV - UA32EH4000W (2.08 mb)