Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
• Make sure your connected devices are powered on, • Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote, RF(Cable/Antenna) Connection The TV is not receiving all channels, • Make sure the Antenna cable is connected securely, • Please try Plug & Play (Initial setup) to add available channels to the channel list, Go to MENU -Setup - Plug & Play (Initial setup) and wait for all available channels to be stored (p, 7), • Verify the Antenna is positioned correctly, The picture is distorted: macro block error small block, dots, pixelization • Compression of video contents may cause picture distortion, especially with fast moving pictures such as sports and action movies, • A low signal can cause picture distortion, This is not a TV issue, PC Connection A "Mode Not Supported" message appears. • Set your PC’s output resolution and frequency so they match the resolutions supported by the TV. (p, 27) "PC" is always shown on the source list, even if a PC is not connected. • This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected, The video is OK but there is no audio. • If you are using a HDMI connection, check the audio output setting on your PC, Network Connection (Depending on Models) Wireless network connection failed. • Samsung Wireless USB dongle is required to use a wireless network, • Make sure the Network Connection is set to Wireless (p, 30), • Make sure the TV is be connected to a wireless IP sharer (router), Recording / Timeshift The USB device is not recognized or a Device Format, Checking Device or Device Performance Test fails, • See the manual for the USB device to check that the USB device supports recording, • If the USB device has a lock, ensure it is off, • Check that the USB device can be formatted when connected to the PC, Connect the USB to the TV and format it, (Formatting may fail intermittently,) • If a Device Performance Test or formatting failed, it means that there is a problem with the USB hardware or the performance of the USB hardware is too low, A message prompts me to format a USB device that has been working well, • If the USB device has a lock, ensure it is off, • Recover the USB device using the recovery function in Checking Device, The recording function does not work, • Check that a USB device is connected, • Check that the channel is a recordable digital channel, • If the signal is weak or does not exist, the recording function will automatically be closed, • The TV will not record if the USB device has no free memory space, Check that this is not the case, Timeshift Mode does not work, • Check that a USB device is connected, • Radio channels and analogue broadcasts are not supported, • Data broadcast channels are not supported, • If the signal is weak or does not exist, the Timeshift Mode function will automatically be closed, • Timeshift Mode cannot be performed if the USB device has no free memory space, Check that this is not the case, A message indicates a performance test failure, and the recording and Timeshift Mode functions do not work, • These problems may occur if you use a low-capacity USB device that does not support recording, • We recommend using the USB HDD, A scheduled recording has failed, • A scheduled recording is disabled for certain operations (formatting, performance test, error checking, deleting) that access the file system of a USB device, • If there is no USB device connected, the TV will not record even if the scheduled time is reached, • The TV will not record if the USB device has no free memory space, Check that this is not the case, • If you record a channel locked with Parental lock, the PIN input window will appear when you try to play back the recording, Several recording devices are connected but the TV stopped recording, • If multiple recording devices are connected and the device set as Default Recording Device has no free memory space, the recording function will be closed, Attempt recording again, The device with the most free memory space will automatically be set as Default Recording Device and the TV will start recording, 58 English Issues Solutions and Explanations Others The picture won’t display in full screen, • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents, • Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV. • Adjust the picture size options on your external device or TV to full screen, The remote control does not work, • Replace the remote control batteries with the poles (+/-) in the right direction, • Clean the sensor’s transmission window on the remote, • Try pointing the remote directly at the TV from 5~6 feet away, The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume, • Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user manual fo...
Otros modelos de este manual:TV - UE40C6990VS (10.27 mb)
TV - UE55C6990VS (10.27 mb)