Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
other models. 43 Installing the Multiple Display Control (MDC) ENG 1 Click the setup.exe file in CD-ROM, and the following screen appears and then the basic files for setup are copied. 2 Select the program installation folder of your choice and click on the button to begin setup. 3 Select the program group of your choice and click the Continue to continue installation. 4 If you see the message Version Conflict during installation, this means that the version of the program is not compatible to the existing program library in your system. Ignore the message and click on Yes. 5 You can run the program once installation is complete. 44 Viewing the Main Screen ENG The program starts operating when entering the following sequence: Start .Program .Multiple Display Control. . . The remote control Enable/Disable function operates whether or not the power is On/Off. This applies to all the displays connected to the MDC. However, regardless of the status in which the MDC was shut down, the remote control signal receiving function of all the displays is initialized to Enable when the MDC is closed. Descriptions OE Main icons : Click the main icons to switch into each screen. . Display selection : Select a display from Display Selection by marking ‘.’. . Select button : Click Select All, Clear All to select or clear all displays. . Info grid : Use Info Grid to see the brief information of selected display. . Control tools : Use Control Tools to control displays. O Title : The current title to be controlled is displayed. . Remote control : It allows you to enable or disable the remote control signal receiving function of the display unit. 45 Confirming the Port ENG . The Multiple Display Control uses only “COM1”. This control operates with neither “COM2” nor another port. . To check which port is installed, enter “Control Panel . System .Device Manager .Ports”. . If another port is installed except the “COM1” port, you can change to “COM1” from the “Device Manager” if you’re using Windows 2000 or XP (please refer to the following chapter). For all other operating systems, the change may be made from your PC BIOS Setup. . Use the Exit menu to end the program. The Help menu shows how to use the program and general information about the program. Changing the Port . The Multiple Display Control uses only “COM1”. This control operates with neither “COM2” nor another port. . You can change the port to “COM1” in Windows 2000 or XP. For all other operating systems, the change may be made from your PC BIOS Setup. . Enter “Control Panel .System .Device Manager .Ports”. And then click the right of mouse to enter “Properties .Port Settings Tab .Advanced”. . Select “COM1”. Click the right of mouse! 46 Select COM1! Controlling the Power . . The Power Control function is available for all the displays are connected. ENG Click “Power Control” of the main icons and the Power Control screen appears. Info Grid shows some basic information necessary to Power Control. OE Power Status . Input Source . Aspect Ratio . On Timer Status . Off Timer Status Click “Select All” or mark ‘.’ in the check box to select the display you want to control. Power Control can control some functions of the ‘.’ marked display. OE Power On/Off -Turns On/Off the power of the selected display. -Turns on each set at one second interval to prevent the power overload that might occur when many sets turn on at the same time. . Volume Control -Controls the volume of the selected display. -It receives the volume value of the selected display from the sets and displays it in the slider. (When you release the selection or choose Select All, the value will return to default 10.) . Mute On/Off -Turns On/Off the mute of the selected display. -When selecting one set at a time, if the selected set is already set on MUTE, you must mark the MUTE display. (if you undo the selections or choose Select All, the values are returned to default settings). . . The Volume and Mute functions are available for only the displays are powered ON. 47 Controlling the Input Source ENG The Input Source control function is available for only the displays are powered On. Click “Input Source” of the main icons and the Input Source control screen appears. Info Grid shows some basic information necessary to Input Source control. OE Power : Shows the power status of the current display. . Input : Shows what Input Source is used for the current display. Click “Select All” or mark ‘.’ in the check box to select the display you want to control. Input Source can control some functions of the ‘.’ marked display. OE Video : Switches the input source of the selected display into Video. . S-Video : Switches the input source of the selected display into S-Video. . Component1 : Switches the input source of the selected display into Component1. . Component2 : Switches the input source of the selected display into Component2. . PC : Switches the input source of the selected display into PC. 48 Controlling the Aspec...
Otros modelos de este manual:TV - PPM42P2S (4.62 mb)
TV - PS-42P2ST (4.62 mb)
TV - PS-42P2STR (4.62 mb)
TV - PS-42P2STS (4.62 mb)