Votos - 2, Puntuación media: 4.5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
¦ Screen Mode (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size. . Not available in Component or HDMI mode. ¦ Digital Noise Filter (Off/Low/Medium/High/Auto /AutoVisualisation): When the broadcast signal is weak, some static and ghosting may appear. Select one of the options until the best picture is displayed. AutoVisualisation: When changing analogue channels, displays the intensity of the current signal and defines the screen noise filter. . Only available for analogue channels. English 15 Basic Features ¦ MPEG Noise Filter (Off/Low/Medium/High/ Auto): Reduces MPEG noise to provide improved picture quality. ¦ HDMI Black Level (Normal/Low): Selects the black level on the screen to adjust the screen depth. . Available only in HDMI mode (RGB signals). ¦ Film Mode (Off/Auto1/Auto2): Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality. . Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i). ¦ Screen Burn Protection: To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. The Time setting allows you to programme the time between movement of the picture in minutes. Pixel Shift (Off/On): Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after image on the screen. . Optimum condition for pixel shift Item TV/AV/Component/ HDMI Horizontal 0~4 4 Vertical 0~4 4 Time (minute) 1~4 min 4min . The PixelShift value may differ depending on the monitor size (inches) and mode. . This function is not available in the ScreenFit mode. AutoProtection Time(10min/20min/40min/ 1hour/Off): If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen. Scrolling: This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after images or symbols on the screen, especially when you displayed a still image on the screen for a long time. . The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-images on the screen. If the after-image is not removed after performing the function, repeat the function again. . Press any key on the remote control to cancel this feature. Side Gray (Dark/Light): When you watch TV with the screen ratio set to 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides. Picture Reset (OK/Cancel) Resets your current picture mode to its default settings. Sound Menu ¦ Changing the Preset Sound Mode Mode ¦ Standard: Selects the normal sound mode. ¦ Music: Emphasizes music over voices. ¦ Movie: Provides the best sound for movies. S.MODE ¦ ClearVoice: Emphasizes voices over other sounds. ¦ Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired. ¦ Adjusting Sound Settings Equalizer Adjusts the sound mode (standard sound mode only). ¦ Balance L/R: Adjusts the balance between the right and left speaker. ¦ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies. ¦ Reset: Resets the equalizer to its default settings. ¦ Sound Systems, Etc. Virtual Surround (Off/On) (standard sound mode only) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology. 16 English Dialog Clarity (Off/On) (standard sound mode only) This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly. Audio Language t (digital channels only) Change the default value for audio languages. . The available language may differ depending on the broadcast. Audio Format (digital channels only) When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function. . Audio Format option may differ depending on the broadcast. 5.1ch Dolby digital sound is only available when connecting an external speaker through an optical cable. Audio Description (not available in all locations) (digital channels only) This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster. ¦ Audio Description (Off/On): Turn the audio description function on or off. AD ¦ Volume: Adjust the audio description volume. AutoVolume (Off/Normal/Night) To equalize the vo...
Otros modelos de este manual:TV - PS42C430A1W (13.79 mb)
TV - PS42C435A1W (13.79 mb)
TV - PS50C430A1W (13.79 mb)
TV - PS50C435A1W (13.79 mb)