Votos - 2, Puntuación media: 5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
20 is the brightest setting. Contrast Menu > Picture > Contrast Adjusts contrast level. Values closer to 100 mean bigger light/dark contrast. Brightness Menu > Picture > Brightness Adjusts brightness level. Values closer to 100 mean brighter screen. Sharpness Menu > Picture > Sharpness Adjusts sharpness of picture. Values closer to 100 mean a sharp image. Colour Menu > Picture > Colour Adjusts colour saturation level. Values closer to 100 mean more intense colours. Tint (G/R) Menu > Picture > Tint (G/R) Adjusts tint levels for green and red. Values closer to 100 mean greater intensity for that colour. To adjust picture quality, follow these steps: 1. Select an option you want to adjust. When you select an option, a slider screen appears. 2. Adjust the option value using your remote. N When you change an option value, the change will affect the OSD menu also. N When your TV is connected to a PC via an HDMI to DVI cable, Colour and Tint (G/R) is not available. N You can adjust and store settings for each external device connected to the TV. N Lowering picture brightness reduces power consumption. Changing the Picture Size Screen Adjustment Menu > Picture > Screen Adjustment Using this function, you can select various picture size and aspect ratio options. . Picture Size Your cable box / satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time. Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratios. 16:9: Adjusts the picture size to 16:9 for DVDs or wide broadcasting. Wide Zoom: Magnifies the picture size more than 4:3. Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. 4:3: The default setting for a movie or normal broadcasting. N Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention (screen burn) which is not covered by the warranty. Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p), DTV (1080i, 1080p) or Component (1080i / 1080p) signals are inputted. Smart View 1: Reduces the 16:9 picture by 50% for LED 5300, LED 5500 series and above Smart View 2: Reduces the 16:9 picture by 25% for LED 5300, LED 5500 series and above N Smart View 1 is enabled only in HDMI mode. N Smart View 2 is enabled only in HDMI or DTV mode. N The picture size can vary when you play content from Videos in AllShare Play. . Zoom/position Adjusts the picture zoom and position. Zoom is only available if Picture Size is set to Zoom. Position is only available if Picture Size is set to Wide Zoom, Zoom, or Screen Fit. To use the Zoom function after selecting Zoom, follow these steps: 1. Select Zoom. 2. On the Zoom/position screen, select Zoom, and then zoom in or zoom out using your remote. 3. When done, select Zoom again, and then select Close. 4. To reset the picture, press Reset. To use the Position function after selecting Wide Zoom, Zoo...
Otros modelos de este manual:TV - UA32EH4030W (2.17 mb)
TV - UA32EH4500W (2.17 mb)
TV - UA32EH4530W (2.17 mb)
TV - UA32EH5300W (2.17 mb)