Votos - 2, Puntuación media: 5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Also, try rerouting your connection cables. An improperly installed wall mount can also create excessive noise. Image Retention (Burn In) Issue. for PDP TV To minimize the possibility of screen burn, this unit is equipped with Pixel Shift screen burn reduction technology. Pixel Shift lets you set the picture so it moves slightly up and down (Vertical Line) and side to side (Horizontal Dot). The regular, slight movement of the picture reduces screen burn in. Anynet+ (HDMI-CEC) (Troubleshooting) Anynet+ does not work. Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. You can connect only one receiver (home theatre). Check if the Anynet+ device power cord is properly connected. Check the Anynet+ device’s Video/ Audio/HDMI cable connections. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Check whether the TV remote control is in TV mode. Check whether the remote control is Anynet+ compatible. Anynet+ doesn’t work in certain situations. (Searching channels, operating Smart Hub or Setup, etc.) If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn your TV off and on again. I want to start Anynet+. Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On. (Menu > System > Anynet+ (HDMICEC)) Open the Tools menu using your remote and then select Anynet+ (HDMICEC). Then select a menu you want. I want to exit Anynet+. Select View TV in the Anynet+ menu. Go to the Source screen using your remote and select a non- Anynet+ device. The message Connecting to Anynet+ device ... appears on the screen. You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. Use the remote control after the TV has completed Anynet+ configuration or has finished switching to Anynet+. The Anynet+ device does not play. You cannot use the play function when Setup is in progress. The connected device is not displayed. Check whether or not the device supports Anynet+ functions. Check whether or not the HDMI cable is properly connected. Check whether Anynet+ (HDMI-CEC) is set to On. (Menu > System > Anynet+ (HDMI-CEC)) Search Anynet+ devices again. Anynet+ requires an HDMI connection. Make sure the device is connected to your TV with an HDMI cable. Some HDMI cables may not support Anynet+ functions. If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected, please repeat the device scan. The TV sound is not output through the receiver. Connect the optical cable between TV and the receiver. The ARC function enables digital output of sound using the HDMI IN 2(ARC) port and can only be operated when the TV is connected to an audio receiver that supports the ARC function. AllShare Play (Troubleshooting) This file may not be playable properly. This may appear because of the high bit rate of the content. Content generally will play but ...
Otros modelos de este manual:TV - UA32EH4030W (2.17 mb)
TV - UA32EH4500W (2.17 mb)
TV - UA32EH4530W (2.17 mb)
TV - UA32EH5300W (2.17 mb)