Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
x5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH. xWhen the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre. .HeadphonesH: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled. xSound function may be restricted when connecting headphones to the TV. xHeadphone volume and TV volume are adjusted separately. .AUDIOOUT: Connects to the audio input jacks on your amplifier/DVD home theatre. xWhen connecting, use the appropriate connector. xWhen an audio amplifier is connected to the AUDIOOUTjacks: Decrease the volume of the TV and adjust the volume level with the amplifier’s volume control. OPTICALWRWRAUDIO INR-AUDIO-Ldigital audio system amplifier, DVD home theatre RedWhite 10 English 02 Connections CONNECTIONS COMMON INTERFACE Slot To watch paid channels, the “CI or CI+ CARD” must be inserted. • If you don’t insert the “CI or CI+ CARD,” some channels will display the message “Scrambled Signal”. • The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. • When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated. . NOTE • You must obtain a “CI or CI+ CARD” from a local cable service provider. • When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it. • Insert the “CI or CI+ CARD” in the direction marked on the card. • The location of the COMMONINTERFACEslot may be different depending on the model. • “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. • If you have any problems, please contact a service provider. • Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen. • When you are watching the satellite TV, remove the “CI or CI+ CARD” of terrestrial and cable. The screen will be distorted or will not be seen. Changing the Input Source Edit Name ¦ VCR/DVD/Cable STB/Satellite STB/PVR STB/ Source List AVReceiver/Game/Camcorder/PC/DVIPC/ SOURCE DVI Devices/TV/IPTV/Blu-ray/HD DVD/DMA: Use to select TV or other external input Name the device connected to the input jacks to makesources such as DVD / Blu-ray players your input source selection easier. / cable box / STB satellite receiver . When a PC with a resolution of 1920 x 1080 @ connected to the TV. 60Hz is connected to the HDMIIN1(DVI) port, ¦ TV/Ext.1/Ext.2/PC/AV/ you should set to DVIPC mode under EditName. Component/HDMI1/DVI/HDMI2/ . When connecting an HDMI/DVI cable to the HDMI3/HDMI4/USB HDMIIN1(DVI) port, you should set to DVIPC or . In the SourceList, connected DVIDevices mode under EditName. inputs will be highlighted. . If an HDMI cable is connected to the . Ext.1,Ext.2 and PCalways stay activated. HDMIIN1(DVI) port, the audio may not work. In this case, connect to the PC/DVIAUDIOIN port. English 11 Basic Features How to Navigate Menus Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions. CONTENTGUIDETOOLSINFORETURNEXITMENU2143 1 ENTERE / Direction button: Move the cursor and select an item. Confirm the setting. 2 RETURN button: Returns to the previous menu. 3 MENU button: Displays the main on-screen menu. 4 EXIT button: Exits the on-screen menu. How to Operate the OSD (On Screen Display) The access step may differ depending on the selected menu. The main menu options appear on the screen: Picture, Sound, Channel, Setup, Input, Application, Support. Select an icon with the ^ or Ў button. Press ENTERE to access the sub-menu. Select the desired submenu with the ^ or Ў button. Adjust the value of an item with the < or > button. The adjustment in the OSD may differ depending on the selected menu. Press ENTERE to complete the configuration. Press EXIT. 1 MENU m 2 ^ / Ў 3 ENTER E 4 ^ / Ў 5 < / > 6 ENTER E 7 EXIT e Using the INFO button (Now & Next guide) The display identifies the current channel and the status of certain audio-video settings. The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time. • Scroll <, > ...
Otros modelos de este manual:TV - UE65C8700XW (11.29 mb)
TV - UE65C8790XS (11.29 mb)