Votos - 5, Puntuación media: 3.6
(
)
)
|
Resumen del manual
They have been set up to be skipped by auto pro gramming or in the programme edit mode. b.Some programmes with the channel number shown in the programme table indicate there is no station name assigned. Picture adjustment Note: Picture menu options are not available for RGB input source. PSM (Picture Status Memory) 1. Press the MENU button and then D DD / E EE button to select the Picture menu . 2. Press the G GG button to select PSM. 3. Press the G GG button and then D DD / E EE button to select a picture setting on the PSM pull-down menu. { CSM{ Contrast{ Brightness{ Colour{ Sharpness{ PSM{DynamicStandardMildGameUserSepiaB_W ( )O}i{OOKOMENU (B-W:Black-White) 4. Press the OK or F FF button. 5. Repeatedly press the MENU button to return to normal TV viewing. The picture Dynamic, Standard, Mild and Game are programmed for good picture reproduction at the factory and cannot be changed. CSM (Colour Status Memory) You can select the picture colour status; standard, reddish, greenish or bluish, as you prefer. 1. Press the MENU button and then D DD / E EE button to select the Picture menu. 2. Press the G GG button and then D DD / E EE button to select CSM. 3. Press the G GG button and then D DD / E EE button to select Standard, Reddish, Greenish or Bluish on the CSM pull-down menu. 4. Repeatedly press the MENU button to return to normal TV viewing. Picture adjustment You can adjust picture contrast, brightness, colour intensity, sharpness and tint (NTSC input only) to the levels you prefer. 1. Press the MENU button and then D DD / E EE button to select the Picture menu. 2. Press the G GG button and then D DD / E EE button to select Contrast, Brightness, Colour or Sharpness. 3. Press the G GG button and then F FF / G GG button to make appropriate adjustments on the each sub menu. 4. Press the OK button to store it for the picture user. 5. Repeatedly press the MENU button to return to normal TV viewing. Time Setting Setting the clock 1. Press the MENU button and then D DD / E EE button to select the Time menu . 2. Press the G GG button to select Clock. 3. Press the G GG button and then D DD / E EE button to adjust the hour. 4. Press the G GG button and then D DD / E EE button to adjust the minute. 5. Press the OK button. 6. Repeatedly press the MENU button to return to normal TV viewing. Setting the On/Off timer By using this function, the set automatically switches on or off at a preset time. You must set the time correctly before using on/off time function. 1. Press the MENU button and then D DD / E EE button to select the Time menu. 2. Press the G GG button and then D DD / E EE button to select Off time/On time. 3. Press the G GG button and then D DD / E EE button to adjust the hour. 4. Press the G GG button and then D DD / E EE button to adjust the minute. 5. Only On time function; Press the G GG button and then D DD / E EE button to adjust programme number and volume level. 6. Press the OK button. 7. Repeatedly press the MENU button to return to normal TV viewing. Note : a. On time works only in standby mode. b. To view the remaining on/off time, select the Time menu. c. When you switch the main power off, theClock is reset . d. Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. Auto sleep If you select On on the Auto off pull-down menu, the set will automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. 1. Press the MENU button and then D DD / E EE button to select the Time menu. 2. Press the G GG button and then D DD / E EE button to select Auto sleep. 3. Press the G GG button and then D DD / E EE button to select On or Off on the Auto sleep pull-down menu. 4. Press the OK or F FF button. 5. Repeatedly press the MENU button to return to normal TV viewing. Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in picture Poor reception on some channels No colour Poor colour Remote control does not work Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched on Try another channel (weak signal) Check aerial (plugged into TV?) Check aerial (broken lead?) Check aerial Check for local interference Adjust contrast Adjust brightness Adjust colour Adjust volume Check the batteries in remote control Check Audio/Video sockets (VCR only) How to Install TV Legs Accessory:Legs 4EA(Front 2EA & Rear 2EA) 1. Lay the TV set down on a soft cloth as shown 4. Lift up the legs of the TV set as shown in the in the figure. figure. 2. Fully insert the two supporting legs marked with “FRONT” into the holes at the bottom of the front cabinet,and secure them as shown in the figure. 3. Fully insert the two supporting legs marked whth “REAR” into the holes at the bottom of the rear cabinet and secure them,as shown in the figure. 5. To avoid any damage caused by ...
Otros modelos de este manual:TV - 14SR1RB (246.57 kb)