Votos - 6, Puntuación media: 4.2
(
)
)
|
Fotos y especificaciones LG 15FC2RB |
Resumen del manual
Calling the programme table You can check the programmes stored in the memory by displaying the programme table. Note :a.You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode. b.Some programmes with the channel number shown in the programme table indicate there is no station name assigned. Picture adjustment Note: Picture menu options are not available for the RGB input source. PSM (Picture Status Memory) You can also recall a desired picture (Dynamic, Standard, Mild, Game or User) with PSM button on the remote control. The picture Dynamic, Standard, Mild and Game are programmed for good picture reproduction at the factory and cannot be changed. CSM (Colour Status Memory) You can select the picture colour status; standard, reddish, greenish or bluish, as you prefer. Eye (option) When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions. At this time the display in green does not appear continuously but the display in yellowappears each time the picture condition changes. Note : a. If you press the PSM or TURBO PICTURE button with the eye function, the eye functionis automatically switched off. b. EYE function is not available for RGB input source. Turbo picture selection (option) When this function is on, the picture will be morebrilliant and distinct than normal picture. Repeatedly press the TURBO PICTURE button to switch on or off. Note : a. If you press the PSM button with the Turbo picture function, the Turbo picture function isautomatically switched off. b. TURBO PICTURE function is not available for RGB input source. Sound adjustment (option) SSM (Sound Status Memory) Sound Frequency Adjustment Press the G GG button in User to display the User sub menu. You can also recall a desired sound (Flat, Music, Movie, Speech or User) with SSM/* button on the remote control. The sound Flat, Music, Movie and Speech are programmed for good sound reproduction at the factory and cannot be changed. Note : If you press the SSM/* button after making appropriate adjustment on the User sub menu, the display User automatically appears even though you have already set a factory preset setting; Flat, Music, Movie or Speech. Turbo sound selection(option) When this function is on, the sound will be more emphasized and amplified than normal sound. X-WAVE (Wireless Sound) (option) You can also listen to the sound through the FMreceiver. Note: a. If the reception is poor or weak, select a different frequency. b. For best results, there should be no more than5m (16.4ft) between the TV and FM Receiver. c. In certain areas, the FM transmitter ability maybe weak, such as near a broadcast tower. d. The reception sensitivity may depend on thekinds of receiver(FM radio). Sound output selection In AV mode, you can select output sound for the left and right loudspeakers. Repeatedly press the I/II/* button to select the sound output. L+R :Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loud-speaker. L+L :Audio signal from audio L input is sent to left and right loud-speakers. R+R:Audio signal from audio R input is sent to left and right loud-speakers. Stereo/Dual reception When a programme is selected, the sound infor mation for the station appears after the programme number and station name disappear. Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II/* button twice. In mono reception the depth of sound is improved. To switch back to stereo, press theI/II/* button twice again. Language selection for dual language broadcast If a programme is received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II/* button repeatedly. DUAL I sends the primary broadcast language to the loudspeakers. DUAL II sends the secondary broadcast language to the loudspeakers. DUAL I+II sends a separate language to each loudspeaker. NICAM reception (option) If your set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast by pressing the I/II/*button repeatedly. 1. When NICAM mono is received, you can select NICAM MONO or FM MONO. 2. When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono. 3. When NICAM dual is received, you can selectNICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or MONO. When FM mono is selected the display MONO appears on the screen. Time Setting Setting the On/Off timer By using this function, the set automatically switches on or off at a preset time. You must set the time correctly before using on/off time function. Note : a. On time works onl...
Otros modelos de este manual:TV - 21FJ4AB (124.68 kb)