Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
Press the G GG button and then F FF / G GG button to make appropriate adjustments on the each sub menu. Contrast80 ( }i{O)OOKOMENU 4. Press the OK button to store it for the picture user. 5. Repeatedly press the MENU button to return to normal TV viewing. Eye (option) Eye is an optional function. Only a set with eye option can perform this function. In some models, the set will automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the most suitable picture according to the surroundings. Press the EYE/* button to switch the eye function on or off. Off When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions. At this time the display in green does not appear continuously but the display in yellow appears each time the picture condition changes. Note : a. If you press the PSM button with the eye function, the eye function is automatically switched off. b. EYE function is not available for RGB input source. Sound adjustment (option) Sound adjustment is an optional function only a set with sound adjustment can perform this function. SSM (Sound Status Memory) You can select your preferred sound setting; Flat, Music, Movie or Speech and you can also adjust the sound frequency of equalizer. 1. Press the MENU button and then D DD / E EE button to select the Sound menu. )O}i{OOKOMENU SSM{ TurboOSnd.{ AVL{ Balance{ Woofer{ Treble{ Bass{ XWAVE{ ( 2. Press the G GG button to select SSM. 3. Press the G GG button and then D DD / E EE button to select a sound setting on the SSM pull-down menu. Sound Frequency Adjustment a. Press the G GG button in User to display the User sub menu. TurboOSnd.{ AVL { Balance { Woofer { Treble { Bass { X WAVE { SSM { {{ Flat Music Movie SpeechUser ( )O}i{OOKOMENU b. Select a sound band by pressing the F FF / G GG button. c. Make appropriate sound level with the D DD / E EE button. d. Press the OK button to store it for the sound User. 0.1O0.4O1.0O4.0O10OkHzEqualizer ()O}{OOKOMENU (RF STEREO, Flat) Repeatedly press the MENU button to return to normal TV viewing. You can also recall a desired sound (Flat, Music, Movie, Speech or User) with SSM/* button on the remote control. The sound Flat, Music, Movie and Speech are programmed for good sound reproduction at the factory and cannot be changed. Note : If you press the SSM/* button after making appropriate adjustment on the User sub menu, the display User automatically appears even though you have already set a factory preset setting; Flat, Music, Movie or Speech. Turbo sound selection (option) When this function is on, the sound will be more emphasized and amplified than normal sound. 1. Press the MENU button and then D DD / E EE button to select the Sound menu. 2. Press the G GG button and then D DD / E EE button to select Turbo Snd.. 3. Press the G GG button and then D DD / E EE button to select On or off. MENU ( )PR ( )PR OK VOLVOL SSM/ SSM { AVL { Balance { Woofer { Treble { Bass { X WAVE { TurboOSnd.{ On Off ( )O}i{OOKOMENU 4. Press the OK or F FF button. 5. Repeatedly press the MENU button to return to normal TV viewing. Sound adjustment (option) SSM{ TurboOSnd.{ AVL{ Balance{ Woofer{ Treble{ Bass{ XWAVE{ )O}i{OOKOMENU( MENU ( )PR ( )PR OK VOLVOL Sound adjustment 1. Press the MENU button and then D DD / E EE button to select the Sound menu. 2. Press the G GG button and then D DD / E EE button to select the desired sound item; AVL (option), Balance, Treble, Bass or Woofer (option). 3. Press the G GG button. 4. Make desired adjustment with the F FF / G GG, D DD / E EE or OK button on each pull-down menu. 5. Repeatedly press the MENU button to return to normal TV viewing. X-WAVE (Wireless Sound) (option) You can also listen to the sound through the FM receiver. 1. Press the MENU button and then D DD / E EE button to select the Sound menu. 2. Press the G GG button and then D DD / E EE button to select X-WAVE. 3. Press the G GG button and then D DD / E EE button to tune in a frequency on the X-WAVE pull-down menu. SSM{ TurboOSnd.{ AVL{ Balance{ Woofer{ Treble{ OffBass{ XWAVE{ 88.787.787.988.188.388.588.9 or )O}i{OOKOMENU( Off106.9107.1107.3107.5107.7107.9106.7 4. Match the TV’s frequency and the FM receiver’s. Some models are displayed as shown below. 1. Press the MENU button and then D DD / E EE button to select the Sound menu. 2. Press the G GG button and then D DD / E EE button to select X-WAVE. 3. Press the G GG button and then D DD / E EE button to select Set Freq. 4. Press the G GG button to tune in a frequency on the X-wave menu. 5. Use the number 0 to 9 or press the F FF / G GG button to match the TV’s frequency and the FM receiver’s. SSM{ TurboOSnd.{ AVL{ Balance{ Woofer{ Treble{ Bass{ X-WAVE{SetOFreq{ Off XWAVEFMO95.0MHz88MHz107MHz ( (( ) ))O OO} }}i ii{ {{O OOOK OKOKO OOMENU MENUMENU}{i09OOKOMENU Note: a. If the reception is poor or weak, select a different frequency. b. For best results, there should be no more that 5m ...