Votos - 2, Puntuación media: 4.5 ( )

Fabricar: LG Tamaño del archivo: 651.78 kb Nombre del archivo: Idioma del manual:

In some models, the set will automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the most suitable picture according to the surroundings. Press the EYE/* button to switch the eye function on or off. Off When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions. At this time the display in green does not appear continuously but the display in yellow appears each time the picture condition changes. Note : a. The eye function is automatically switched off. b. EYE function is not available for RGB input source. Picture adjustment You can adjust picture contrast, brightness, colour intensity, sharpness and tint (NTSC input only) to the levels you prefer. 1. Press the MENU button and then D DD / E EE button to select the Picture menu. 2. Press the G GG button and then D DD / E EE button to select Contrast, Brightness, Colour or Sharpness. 3. Press the G GG button and then F FF / G GG button to make appropriate adjustments on the each sub menu. 4. Press the OK button to store it for the picture user. 5. Repeatedly press the MENU button to return to normal TV viewing. Sound adjustment SSM (Sound Status Memory) You can select your preferred sound setting; Flat, Music, Movie or Sports and you can also adjust the sound frequency of equalizer. 1. Press the MENU button and then D DD / E EE button to select the Sound menu. 2. Press the G GG button to select SSM. 3. Press the G GG button and then D DD / E EE button to select a sound setting on the SSM pull-down menu. Sound MusicMovieSportsUserFlatSSM{ Turbo0Sound{ AVL{ Balance{ XWAVE{ ()O}OOKOMENU Sound Frequency Adjustment a. Press the G GG button in User to display the User sub menu. b. Select a sound band by pressing the F FF / G GG button. c. Make appropriate sound level with the D DD / E EE button. d. Press the OK button to store it for the sound User. Repeatedly press the MENU button to return to normal TV viewing. The sound Flat, Music, Movie and Sports are programmed for good sound reproduction at the factory and cannot be changed. Turbo sound selection When this function is on, the sound will be more emphasized and amplified than normal sound. 1. Press the MENU button and then D DD / E EE button to select the Picture menu. 2. Press the G GG button and then D DD / E EE button to select Turbo Sound 3. Press the G GG button and then D DD / E EE button to select On or off 4. Press the OK or F FF button. 5. Repeatedly press the MENU button to return to normal TV viewing. Sound adjustment You can adjust balance, AVL (Auto Volume Leveler), AVL automatically keeps on an equal volume level even if you change programmes. The Turbo sound creates an all around sound as in a concert hall. 1. Press the MENU button and then D DD / E EE button to select the Sound menu. 2. Press the G GG button and then D DD / E EE button to select the desired sound item; AVL or Balance. 3. Make desired adjustment with the F FF / G GG, D DD / E EE or OK button on each pull-down menu. 4. Press the OK button. 5. Repeatedly press the MENU button to return to normal TV viewing. X-WAVE (Wireless Sound) (option) You can also listen to the sound through the FM receiver. 1. Press the MENU button and then D DD / E EE button to select the Sound menu. 2. Press the G GG button and then D DD / E EE button to select X-WAVE. 3. Press the G GG button and then D DD / E EE button to select Set Frequency. 4. Press the G GG button to tune in a frequency on the X-wave menu. 5. Use the number 0 to 9 or press the F FF / G GG button to match the TV’s frequency and the FM receiver’s. Note: a. If the reception is poor or weak, select a different frequency. b. For best results, there should be no more than 5m (16.4ft) between the TV and FM Receiver. c. In certain areas, the FM transmitter ability may be weak, such as near a broadcast tower. d. The reception sensitivity may depend on the kinds of receiver (FM radio). Sound output selection In AV mode, you can select output sound for the left and right loudspeakers. Repeatedly press the I/II/* button to select the sound output. L+R :Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loud-speaker. L+L :Audio signal from audio L input is sent to left and right loud-speakers. R+R:Audio signal from audio R input is sent to left and right loud-speakers. Sound adjustment Stereo/Dual reception When a programme is selected, the sound information for the station appears after the programme number and station name disappear. Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II/* button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II/* button twice again. Language selection for dual language broadcast If a programme is received in two lan...

Descargar ahora

Introduzca dos números de la imagen: