Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
If you watch TV for a long period of time, this may cause blurred vision. y yOnly use the specified type of battery. This could cause damage to the remote control. y yDo not mix new batteries with old batteries. This may cause the batteries to overheat and leak. y yMake sure there are no objects between the remote control and its sensor. y ySignal from the remote control may be disturbed by sun light or other strong light. In this case, darken the room. y yWhen connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product. 8 ENEGNLGISH SAFETY INSTRUCTIONS y yDo not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock. y yPlease follow the installation instructions below to prevent the product from overheating. - -The distance between the product and the wall should be more than 10 cm. - -Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard). - -Do not install the product on a carpet or cushion. - -Make sure the air vent is not blocked by a tablecloth or curtain. Otherwise, this may result in fire. y yTake care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product. y yPeriodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. y yPrevent dust collecting on the power plug pins or outlet. This may cause a fire hazard. y yProtect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. y yDo not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it. y yAvoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. y yWhen cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel. Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage). y yAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH. y yWhen unplugging the cable, grab the plug and unplug it. If the wires inside the power cable are disconnected, this may cause fire. y yWhen moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock. 9 ENEGNLGISH SAFETY INSTRUCTIONS y yWhen moving or unpacking the product, work in pairs because the product is heavy. Otherwise, this may result in injury. y yContact the service center once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure. y yRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. y yIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product. y yThe panel is a high technology display product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund. y yYou may find different brightness and color of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction. y yDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is ...
Otros modelos de este manual:TV - 42LS3400 (30.15 mb)