Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
yyThe synchronization input waveform for Horizontal and Vertical frequencies are separate. yyWe recommend using 1920x1080, 60 Hz(Except for 42/50PT****, 42/50PW****, 22/26/32LK33**, 19/26/32LV25**, 19/22LV23**), 1024x768, 60 Hz(Only 42/50PT****, 42/50PW****) 1360 x768, 60 Hz(Only 22/26/32LK33**, 19/26/32LV25**, 19/22LV23**) for the PC mode, this should provide the best picture quality. yyConnect the signal cable from the monitor output port of the PC to the RGB (PC) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV. yyConnect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV). yyIf using a sound card, adjust PC sound as required. yyIf the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV. yyDOS mode may not work depending on the video card if you use an HDMI to DVI cable. yyIf you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality. NOTE yyIf you use an external audio device instead of the built-in speaker, set the TV speaker feature to off (See p.74). Digital optical audio connection Transmits the digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. NOTE yyDo not look into the optical output port. Looking at the laser beam may damage your vision. Connecting to a USB Connect a USB storage device such as s USB flash memory, external hard drive or a USB memory card reader to the TV and access the My media menu to use various multimedia files. See “Connecting USB storage devices” on p.55 and see “Browsing files” on p.56 . Headphone connection (Except for 42/50PT25**, 50/60PV25**, 42/50PT35**, 50PV35**, 50/60PZ25**, 42/50PW45**, 50/60PZ55**, 42/50PT45**) Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown on the following illustration. or Connecting to a CI Module View the encrypted (pay) services in digital TV mode. See p.38. NOTE yyAUDIO menu items are disabled when connecting a headphone. yyWhen changing AV MODE with a headphone connected, the change is applied to video but not to audio. yyOptical Digital Audio Out is not available when connecting a headphone. yyHeadphone impedance: 16 . yyMax audio output of headphone: 10 mW to 15 mW yyHeadphone jack size: 0.35 cm Check this point as shown and insert the CI Module. NOTE yyCheck if the CI module is inserted into the PCMCIA card slotin the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. No. Description 1 Displays the previously viewed TV channel. 2 Plays discs. When multiple discs are available, the title of the disc appears at the bottom of the screen. 3 Controls the connected VCR. 4 HDD recordings playback: Controls the recording stored in HDD. 5 Audio out to home theater speaker or Audio out to TV: Changes the audio output between Home theater speaker and TV speaker. SIMPLINK connection Use the TV remote control to play and control the AV device connected with the HDMI cable through HDMI-CEC. Your TV only works with the devices that support HDMI-CEC. Connect one end of the HDMI cable to the HDMI/ DVI IN or HDMI IN terminal on the rear of the TV and the other end to the SIMPLINK device. In wireless external output, SIMPLINK function is not supported. - A check mark appears in front of the selected device. - Available devices display in a bright colour. - Unavailable devices display in grey. NOTE yyIf the connected device does not support HDMI-CEC, the SIMPLINK feature is unavailable. yyTo operate SIMPLINK, an High Speed HDMI Cable with *CEC function should be used. (*CEC: Consumer Electronics Control). 4 Control the selected AV device. - Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. - Select AV device: Enables you to select one of the AV devices connected to the TV. - Disc playback: Control connected AV devices by pressing the Navigation buttons, OK, and buttons. - Power off all devices: When you power off the TV, all connected devices are turned off. - Switch audio-out: Offers an easy way to switch audio-out. - Sync Power on: When the equipment with SIMPLINK function connected HDMI terminal starts to play, The TV will automatically turn on. Activating the SIMPLINK feature 1 Press SIMPINK to access the SIMPLINK menus. 2 Press the Navigation buttons to scroll to On. 3 Press the Navigation buttons to scroll to one of the devices and press OK. NOTE yyImage shown may differ from your TV. yyIf you change the input source by pressing INPUT, the progressing function of the SIMPLINK device wil...
Otros modelos de este manual:TV - 42LW4500 (11.29 mb)
TV - 50PV350 (11.29 mb)
TV - 50PZ250 (11.29 mb)
TV - 37LK430 (11.29 mb)