Votos - 3, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
^ Image shown may differ from your TV. Current time l^pTVl 11-3 Mnet Music Sat, 1 Jan 12:02 < ► Prev./Next ^ Pr. Change ® Schedule I was not blown away by this movie like everyone else seems to be. Programme name or external device name Detail information on programme (for digital broadcast) □ To set favourite programmes HOME ^ Settings ^ SETUP ^ Programme Edit 1 Move to the desired programme and press Wheel(OK) button. Programme is selected. 2 Press Set as Favourite. 3 Select the desired Favourite Pr. Group. 4 Select OK. Favourite is set. □ To use Favourite HOME ^ Pr. List Programme list will appear. Selects the desired preset favourite programme from Favourite List A to D. HOME ^ Programme Guide [In Digital Mode Only] Obtains information about programmes and airing times. Obtains programme information and schedules viewing / recording. [Image shown may differ from your TV.] ^m +24H ■ Se'ebysdidule - Schedule Lis^'Tra^ Favourite Pr. Group Press Wheel(OK) button after moving to a programme of your choice to view or view / record. After viewing the schedule list, makes revisions or deletions. Makes schedule reservation by selecting date / time / programme. Makes repeat schedule reservation. □ Automatically Setting Up Programme HOME ^ Settings ^ SETUP ^ Auto Tuning Automatically tunes the programmes. 1 Select Country where the TV is used. Programme settings change depending on the country you choose. 2 Initiate Auto Tuning. 3 Select Input Source of your choice. 4 Set Auto Tuning following screen instructions. ^ If Input Source is not connected properly, programme registration may not work. ^ Auto Tuning only finds programmes that are currently broadcasting. ^ If Lock System is turned on, a pop-up window will appear asking for password. D Cable DTV Setting option When searching for programmes using FULL setting it can take a long time. The following values are needed in order to search all available programmes quickly and correctly. The commonly used values are provided as “default”. Frequency Enter a user-defined frequency. Symbol rate Speed at which a device such as modem sends symbols to a programme. Modulation Loading of audio or video signals onto carrier. Network ID Unique identifier allocated for each user. Start Frequency Enter a user-defined start frequency range. End Frequency Enter a user-defined end frequency range. D Satellite Setting Option Satellite Select your desired Satellite. LNB Frequency Select one value from 9750/10600, 9750/10750, 9750, 10600,10750, 5150. If you select 9750/10600, 9750/10750(MHz), 22KHz Tone is disabled. If you cannot find the LNB frequency value from the list, select User and manually enter the frequency. Transponder Select the transponder you want to tune. 22KHz Tone When using 22KHz Tone switch, select A or B. If you use 22KHz Tone, Unicable and Motor Type are disabled. LNB Power To enable the power supply for the LNB, select On. If you select Off, Motor Type is disabled. DiSEqC When using DiSEqC, select one option from A~D/ToneA~B. If you use DiSEqC, Unicable and Motor Type are disabled. Unicable Settings Select On to use Unicable and set the Unicable in the Unicable Setting menu. When Unicable is enabled, 22KHz Tone, DiSEqC, Motor Type are disabled. Motor Type Select Motor Type to use Motor and set the Motor in the Motor Setting menu. When Motor is enabled, 22KHz Tone, DiSEqC, Unicable are disabled. ^ If you set satellite to others, you must add a transponder using Manual Tuning. ^ When selecting 22KHz Tone and DiSEqc, you must connect them in the same position as displayed on the OSD. ^ If you delete a Satellite, all programmes stored in the Satellite are deleted. □ Motor Setting Option • DiSEqC 1.2 : Control motor to change satellite dish position. Drive Direction Select the direction in which you want to move the motor. Drive Mode Two modes are available : Step and Continuous. • Step : The motor moves based on the value you enter (from 1 to 128). • Continuous : The motor moves continuously until you press the Stop. Test TP Select the test TP you want to tune. Set Limit Set the motor movement to east or west to have the motor move only within the direction set. • On : You can limit the movement to the current direction by selecting the West/East. • Off : You can cancel the limit you set. Go To Zero You can move the motor to Zero. Store You can save the motor’s current direction. USALS : Set your current location(Longitude/Latitude). □ Cable DTV Setting HOME ^ Settings ^ SETUP ^ Cable DTV Setting [In Cable, Cable & Satellite mode only] Service Operator Set Service Operator. When changing Service Operator, the existing saved programmes are deleted and Auto Tuning runs. Channel Auto Update • On : You can update information for all the programmes that can be updated, including the programme currently being watched. • Off : You can only update information for the programme currently being watched. ^ ...
Otros modelos de este manual:TV - 47LM761S (18.81 mb)