Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)” When applying the RF Isolator, a slight loss of signal sensitivity can occur. CAUTION yyPower Cord Installation Guide --If the power cord provided with TV looks like the below picture, please ensure that it is inserted in the right direction. TVPower CordCorrectWrong Parts and buttons B type : 32/42LS345* A type : 19/22/26/32LS35**, 26/32/42CS46**, 32/42LS340* buttons Screen Screen OKINPUTSETTINGSSETTINGSINPUTOK INPUTOKSETTINGS Remote control and intelligent sensors1 Power indicator Speakers Speakers Touch buttons Remote control and intelligent sensors1 Power indicator Buttons Description A type2 B type H H Scrolls through the saved programmes. H H Adjusts the volume level. OK . H Selects the highlighted menu option or confirms an input. SETTINGS S Accesses the main menu, or saves your input and exits the menus. INPUT H Changes the input source. / I Turns the power on or off. 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 A type buttons are touch sensitive and can be operated through simple touch with your finger. Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. CAUTION yyAvoid touching the screen at all times, as this may result in damage to the screen. yyIt is recommended to move the TV in the box or packing material that the TV originally came in. yyBefore moving or lifting the TV, disconnect the power cord and all cables. yyWhen holding the TV, the screen should face away from you to avoid damage. yyHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. yyWhen transporting a large TV, there should be at least 2 people. yyWhen transporting the TV by hand, hold the TV as shown in the following illustration. yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration. yyWhen transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. Securing the TV to a table (Only 32LS35**, 26/32/42CS46**, 32/42LS34**) Fix the TV to a table to prevent from tilting forward, damage, and potential injury. To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand. WARNING yyTo prevent TV from falling over, the TV should be securely attached to the floor/ wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. Adjusting the angle of the TV to suit view (Only 32/42CS46**, 32/42LS340*) Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 2020 CAUTION yyWhen adjusting the angle of the product, watch out for your fingers. »»Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. Mounting on a table 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm10 cm10 cm10 cm 2 Connect the power cord to a wall outlet. CAUTION yyDo not place the TV near or on sources of heat, as this may result in fire or other damage. Securing the TV to a wall (This feature is not available for all models.) 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. --If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-b...
Otros modelos de este manual:TV - 22LS3500 (15.62 mb)
TV - 26LS3500 (15.62 mb)
TV - 32CS460 (15.62 mb)
TV - 32LS3400 (15.62 mb)