Votos - 2, Puntuación media: 3 ( )

Fabricar: Toshiba Tamaño del archivo: 4.59 mb Nombre del archivo: Idioma del manual:

Coaxial cables . Standard AV cables . Standard audio cables . Composite or component video cables . You can connect the component video cables (plus audio cables) from the DVD player or satellite receiver to the COLOR STREAM HD terminal in the TV. The COLOR STREAM HD terminal can be used to display Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. Note that 1080p is not supported. Check the User’s Guide of the DVD player in order to determine the best output signal available. 32 32 . If your DVD player or satellite receiver does not have component video, connect a standard A/V cable to the AUDIO/VIDEO terminal. If your DVD player has HDMI® video, see “Connecting an HDMI® or DVI device to the HDMI® input” on page 35. NOTE When you use ColorStream® HD or Video, please switch to the appropriate AV mode. To view antenna or Cable channels: Select the ANT/CABLE video input source on the TV.* To view the DVD player: Turn ON the DVD player. Select the ColorStream® HD video input source on the TV.* To view satellite programs using the component video connections: Turn ON the satellite receiver. Select the ColorStream® HD video input source on the TV.* To view the VCR or view and record antenna channels: Turn ON the VCR. Tune the VCR to the channel you want to watch. Select the VIDEO video input source on the TV.* To record a TV program while watching a DVD: Turn ON the VCR. Tune the VCR to the channel to record. Select the ColorStream® HD video input source on the TV* to view the DVD. *To select the video input source, press the INPUT button on the remote control, see “Selecting the video input to view” on page 86. NOTE The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Connecting remote IR devices Using the IR blaster OUT terminal You can use the TV’s IR OUT terminal to remotely operate many infrared remote-controlled devices enclosed in an entertainment center or similar cabinet. Items needed: Connecting Your TV 33 Connecting remote IR devices . Dual-wand IR blaster cable (see “Dual-wand IR blaster cable” on page 29) . Other cables as required to connect the device(s) to the TV (see “Overview of cable types” on page 27) See the remote IR blaster setup section. To connect the IR blaster cable: 1 Locate the infrared sensor on the front of your device. This sensor is marked on some devices.If you are having issues locating the device's infrared sensor, see “If you cannot locate the device’s infrared sensor:” on page 34. 2 Align one of the IR blaster cable’s wands approximately 1 inch away from the infrared sensor on the front of the device and attach it using double-sided mounting tape. If you have a second...

Descargar ahora

Introduzca dos números de la imagen: