Votos - 1, Puntuación media: 4 ( )

Fabricar: Toshiba Tamaño del archivo: 5.87 mb Nombre del archivo: Idioma del manual:

When the TV is on, the green LED indicator on the TV front will be illuminated. 2. PIC MODE selects the picture mode (. page 34). 3. SLEEP accesses the sleep timer (. page 41). 4. PIC SIZE cycles through the picture sizes: Full, TheaterWide 1/2/3, Natural(. page 33). 5. Channel Numbers (0–9, –/100) directly tune channels. The button is used to tune digital channels (. page 32) or to be the numeric key for other function. 6. INPUT selects the video input source (. page 32). 7. CH p• cycles through programmed channels (. page 30). 8. VOL + – adjusts the volume level. 9. FAV BROWSER accesses the favorites list in the Favorites Channel Set Menu (. page 32). 10. RECALL displays TV status information (. page 42). 11. CH RTN returns to the last viewed channel (. page 32). 12. MUTE reduces or turns off the sound (. page 36). 13. INFO displays TV status information as well as program details, when available (. page 42). 14. Arrow buttons (pqtu) When a menu is on-screen, these buttons select or adjust programming menus. 15. ENTER activates highlighted items in the main menu system. 16. MENU accesses the main TV menu system (. page 27). 17. EXIT closes on-screen menus. 18. MODE SELECT switch switches between TV, CABLE/SAT, AUX 1, and AUX 2 modes (. page 22). Set to “TV” to control the TV. 1 Chapter 3: Using the remote control Using the remote control to control your other devices If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so) (. pages 24–26). To use your TV remote control to operate a: • Cable converter box or satellite receiver, set the MODE SELECT switch to CABLE/SAT. • VCR, set the MODE SELECT switch to AUX 1. • DVD player or HTIB, set the MODE SELECT switch to AUX 2. Note: Even after the TV remote control is programmed, it may not operate certain features on any other devices. If this happens and you wish to use those features, you will need to use the device’s original remote control. Point the remote control directly at the device. 16171918 1. POWER Turns the selected device on and off. 2. Channel Numbers (0-9) Press to directly access channels (as opposed to ) or to be the numeric key for other function. 3. +10 Press to directly access DVD chapters higher than 10. 4. TOP MENU Accesses a DVD’s top menu. 5. CH p• For channels programmed into the channel memory (. page 30): • selects the next higher channel. • selects the next lower channel. 6. GUIDE Displays the channel guide in the CABLE/SAT mode. SET UP Accesses a DVD’s setup menu in the AUX mode. 7. INFO Displays TV status information on-screen. 8. pqt• Press to navigate DVD menus (may not work on some DVD players). 9. ENTER Required by some satellite receivers and DVD players to activate certain functions. 10. DVD CLEAR Press to reset the title and chapter number. 11. PLAY Begins playback of a tape or DVD. 12. ...

Descargar ahora

Introduzca dos números de la imagen: