Iniciar sesión:
Votos - 1, Puntuación media: 3 ( )

Manual de usuario Toshiba, modelo 20HL67

Fabricar: Toshiba
Tamaño del archivo: 14.14 mb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Press DVD first. Programming the remote control to operate your other devices This remote control is pre-programmed to operate most Toshiba satellite receivers, VCRs, and DVD players. To control a non-Toshiba device (or a Toshiba device that the remote control is not preprogrammed to operate), you must follow the steps below to program your remote control. 1. Refer to the code tables (on pages 22 and 23) to find the corresponding code for your device. If more than one code is listed, try each one separately until you find the one that works. 2. If you are programming the remote control to operate your: • Cable TV converter/satellite receiver: Press CBL/SAT. • VCR: Press VCR. • DVD player: Press DVD. 3. While holding down DISPLAY, press the Channel Number buttons to enter the three-digit code for your device within 10 seconds. Note: If you do not enter the code within 10 seconds from step 3, or if you enter the wrong code, this operation is canceled. 4. Point the remote control at the cable TV converter/ satellite receiver, VCR or DVD player, and press POWER to test the code. • If the device responds, you entered the correct code. • If the device does not respond, repeat steps 1—4 using another code. 5. Press TV to control the TV. For future reference, write down the codes you used: Cable TV converter/satellite receiver code _ VCR code _ DVD player code _ Note: When shipped from the factory, the remote control is set to operate your TV. Each time you replace the batteries, you must reprogram the remote control. • Some newer VCRs are capable of working on either of two remote codes. These VCRs have a switch labeled VCR1/VCR2. If your VCR has this kind of switch and does not respond to any of the codes for your VCR, set the switch to the other position (VCR1 or VCR2) and reprogram the remote control. INPUT DISPLAY 99 - ^QDGD, sss ■----8ЮР/ ► REW № 8а«СИ1 i (^) Q (S*), TOSHIBA MUTE POWER DISPLAY INPUT Number buttons DVD MENU ENTER DVD controls DVD SKIP/SEARCH CLEAR TOP MENU INPUT DISPLAY MUIS ООО “V —_ .COCiJLD, GD©CD bmm/ o^=^o c±b(5b ЗЯЗР/ . .У-"" ¿ftp/./: samen mm re «еайсн Otros modelos de este manual:
TV - 20HL67 (14.14 mb)


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría