Votos - 2, Puntuación media: 4 ( )

Fabricar: Toshiba Tamaño del archivo: 6.32 mb Nombre del archivo: Idioma del manual:

page 51). • The connected devices must also be set. For details, see the operation manual for each device. • The REGZA-LINK feature uses the CEC technology as regulated by the HDMI standard. • This feature is limited to models incorporating Toshiba’s REGZA-LINK. However, Toshiba is not liable for those operations. Refer to the individual instruction manuals for compatibility information. Note: This feature may not work properly depending on the devices that are connected. Connecting a digital audio system The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby®* Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby® Digital decoder or other external audio system with optical audio input. You will need: • optical audio cable (Use an optical audio cable that has the larger “TosLink” connector and not the smaller “mini-optical” connector.) Dolby Digital decoder or other digital audio system TV back panel To control the audio: 1. Turn on the TV and the digital audio device. 2. Press on the TV’s remote control and open the Audio menu. 3. Highlight Audio Setup and press . 4. In the Optical Output Format field, select either Dolby Digital or PCM, depending on your device (.“Selecting the optical audio output format” on page 44). Done Audio Setup Language Reset MTS Stereo English Optical Output Format Dolby Digital HDMI 1 Audio PC Audio No Auto Dynamic Range Control Compressed Dolby Digital Note: • • Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY. • • The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions. * * Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Connecting an audio system This connection allows you to use external speakers with an external analog audio amplifier to adjust the sound level. You will need: • standard audio cables LINE IN L R Analog audio amplifier TV back panel To control the audio: 1. Turn on the TV and the stereo amplifier. 2. Set up a optimum volume level of the stereo amplifier. Then you can adjust the sound volume level from the TV’s volume control or the amplifier’s volume control. 3. Menu item of Speakers can turn to OFF to mute the TV’s built in speakers. Connecting a personal computer (PC) With either the PC IN or HDMI connection, you can watch your computer’s display on the TV and hear the sound from the TV’s speakers. To connect a PC to the PC IN terminal on the TV: When connecting a PC to the PC IN terminal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable. PC audio cable PC audio output Conversion adapter (if necessary) Computer TV back panel • To use a PC, set the monitor output resolution...

Descargar ahora

Introduzca dos números de la imagen: