Votos - 2, Puntuación media: 3 ( )

Fabricar: Toshiba Tamaño del archivo: 6.07 mb Nombre del archivo: Idioma del manual:

To save your entries, highlight Done and press . To return to factory defaults, highlight Reset and press . To open the Channel Browser™: • Press • or • on the remote control. • Press • to surf backward through the previously tuned channels in the History list, the channels in the ANT/ CABLE channel list, the inputs in the Inputs list, the REGZA-LINK® devices in the REGZA-LINK® list, or the favorite channels/inputs in the Favorites list. • Press • to surf forward through the channel History, the ANT/CABLE channel list, the Inputs list, the REGZA-LINK® list, or the favorite channels/inputs in the Favorites list. Elements of the Channel Browser™ 2 3 1032 4 1. Current list (History, ANT/CABLE, Inputs, Favorites, or REGZA-LINK) 2. Channel or input currently being viewed 3. Channel or input that is currently highlighted in the browser4. Channels stored in the History List To toggle through the available lists: After opening the Channel Browser™ , press • or • to toggle among History, ANT/CABLE, Inputs, Favorites, and REGZA-LINK. Note: •The Channel Browser™ opens in History List by default. Once another list has been selected, the Channel Browser™ will open in the last selected list. •If all lists are turned off, pressing t, u, or will not display the Channel Browser™ . If Favorites List is turned off, will have no effect. •Pressing will bring up the Channel Browser™ Favorites list regardless of the last selected list in the Channel Browser™ . To tune to a channel or input in Browse mode: • or • to open the Channel Browser™ and surf back to a previous item or surf forward to the next item in the list. In Browse mode, when you stop on an item in the Channel Browser™, it will be highlighted and the TV will automatically tune to the channel or input. 1. While watching TV, press to close the Channel Browser™ . 2. Press To tune to a channel or input in Select mode: • or • to open the Channel Browser™ and surf back to a previous item or forward to the next item in the list. In Select mode, when you stop on an item in the Channel Browser™, it will be highlighted but you must press 1. While watching TV, press to tune the TV to the highlighted item. to tune the TV to the highlighted item. 2. Press to close the Channel Browser™ . 3. Press Adding and clearing channels and inputs in the History List Adding channels and inputs to the History List: As a channel or input is tuned, the Channel Browser™ adds it to the History List and displays it on the “right side” of the Channel Browser™. Previously tuned channels/inputs are “shifted” to the left, eventually moving off the left side. Press • to surf backward through the previously tuned channels/inputs. Any channel or input that is tuned repeatedly will not be repeated in the History List, but instead is moved to the end of the list on the right side of the Channel Browser™ . The Channel Browser™ will store the following channels: •All channels that are tuned using the numeric buttons on the remote control. • All channels that are tuned using or on the remote control. Note: Whenever an item is selected that cannot be tuned (for various reasons), the TV will automatically tune to the previously viewed channel or input. (continued) Chapter 6: Using the TV’s features Clearing channels from the History List: • Reconfiguring the ANT/CABLE input will clear the History List. Note: See page 24 for details on configuring the antenna input. • Turning off the TV will clear the History List. Setting the Channel Tuning Mode This feature allows you to choose how tuning will be handled for analog and digital channels when the TV is in Antenna mode. Note: To use this feature, the Input Configuration must be set to Antenna (. page 24). The channel tuning mode has three options. Mode Description Both analog and digital channels can Standard be tuned normally Digital channels will have priority when manually entering a channel number Auto using the Channel Number (0-9) on the (default) remote control, analog channels can still be tuned by / , if available Digital Only digital channels can be tuned To set the Channel Tuning Mode: 1. From the Setup menu, highlight Installation and press . A new set of Installation menu icons will appear. 2. Open the Terrestrial menu, highlight Channel Tuning Mode, and then press • to select your desired mode. Note: •The Channel Options windows as well as the Channel Browser ANT/CABLE list will be updated automatically when you change the mode. Also, the History List will be cleared, but the Favorites List will be saved. •Even if the Channel Tuning Mode is set to Digital, analog channel 3 will still be the default channel to prevent the initial case where no digital channels have been found in prior channel scans. (Channel Options will not have anything listed until a scan is done.) Tuning to the next programmed channel To tune to the next programmed channel: Press or on the remote control or TV control panel. Note: This feature will not work unless you program chan...

Descargar ahora

Introduzca dos números de la imagen: